Matronics Email Lists

Looks like you have more than enough to go on here but I'll chime in anyway - see:

http://www.europaowners.org/forums/gallery2.php?g2_itemId=48326

Happy building,

Dan

I bought a new, in-the-crate, 914F in Jan of 2006 for $18k. At the time, they were going for around $30k but I totally discount the fact that it's certified for the earlier stated reason that in an ex ...

For what it's worth, those going with the new Dynon Skyview, there are two fans already built onto the back. Not sure how effective they'll be but should reduce the load of whatever cooling system is ...

This might not help if you're in the UK, but for US or Canadian builders it might be helpful.

I got my aluminum sheet at

http://www.onlinemetals.com/merchant.cfm?id=239&step=2&top_cat=6 ...

While we're on the subject, I'll be needing to purchase my position lights soon, to be installed inside a rebate on the front/outermost wingtips inside the custom clear fairings I bought from Aerial P ...

If memory serves, I mixed up 60g per window and had a smidgen left over. To be more precise, that was 43g of the yellow and 17.2g of the blue for a total of 60.2g.

Dan

For some reason the photos didn't come through in this post. Any chance you could post them again or put them somewhere in the gallery?

Thanks,

Dan

Visit - www.EuropaOwners.org

I bought mine from this source last October and had no problems. The part numbers are:

1 - A225066050EAV01

Price was $314 plus shipping.

Didn't have to talk to Mr. What's-his-name as I was ab ...

Hi Bob,

Sorry for the delay. I haven't been monitoring this site as my motherboard went out and just got it replaced. Also, been busy traveling for the new client so haven't been building much.

...

Hi Fred,

Can't say I have experience with the operation of the mod yet, but I've posted some photos of it in the gallery if that'll help.

http://www.europaowners.org/modules.php?set_albumName=a ...

[b:fa823cf774]Ron,

Thanks for the input. Regarding your questions, please see below:[/b:fa823cf774]

Did you install a down detent spring for latch?
[b:fa823cf774]No, but plan to install a pin t ...

Will,

Have a look at:

http://www.europaowners.org/modules.php?set_albumName=album164&op=modload&name=gallery&file=index&include=view_album.php

Or if the link doesn't work, go ...

Will,

Have a look at:

http://www.europaowners.org/modules.php?set_albumName=album164&op=modload&name=gallery&file=index&include=view_album.php

Or if the link doesn't work, go ...

You might also take a look at making a dolly to support the wing while working on it and for moving it about the shop single handed. See this:

http://www.europaowners.org/modules.php?set_albumName= ...

If anyone's interested, I saw 3 Rotax 912's up on EBay this morning. They're in Boise, Idaho, USA.

Here's the link:

http://cgi.ebay.com/ebaymotors/Rotax-engine-80hp-912-UL-3_W0QQitemZ26016215126 ...

Hi Bud,

This is similar to what Graham supplied with his special fittings. I was thinking about doing away with the sight tube altogether as I've installed one of the electric float type gauges in ...

Still wondering.........

Posted this a week or so ago and am in the midst of fitting my fuel system. Any advice is much appreciated.

----------------------------------
On the post regarding the ...

Just wondering....

On the post regarding the FS02 for the sight gauge, someone mentioned that the redux in the fuel breaks down over time.

Considering that the Singleton fuel fittings mod calls ...

Hi Bob,

Thanks for the post about pins. I too ordered some pins from them so I'd have extras and to replace one I botched up. I first found them on-line but noticed they have distributors, a couple ...

Richard,

I found a post on the EAA site some time ago about using Gates R9 fuel injection hose instead of the standard stuff which is usually sold in the states as R7, or some variance thereof. The ...