Matronics Email Lists

A lot of people seem to want to move functions onto their stick or their
throttle. I would counsel some thought about how you use that function
before you rush to put it on your stick.

The first ...

On Aug 20, 2006, at 7:59 AM, Eric M. Jones wrote:

<emjones@charter.net>

There has been some confusion over using the terms "Certified" and
Certificated" I hope I can ...

On Aug 20, 2006, at 8:29 AM, Dave N6030X wrote:

<N6030X@DaveMorris.com>

But Master Eric, does that mean I'm "certifiable" if I pay $8,600
for a JPI EDM-900-4 for a " ...

On Aug 18, 2006, at 12:41 AM, Gene Hubbard wrote:

<enhubbard@sbcglobal.net>

I've just mounted a Microair 760 comm radio in my Pietenpol
project. It's attached to a commercial soli ...

On Aug 17, 2006, at 9:28 PM, CardinalNSB@aol.com wrote:

If I remove the connector from the back of my radio and measure
across the shield and inner conductor of the antenna coax (leaving
...

Remember, the forward voltage drop on most red LEDs is about 1.5V.
The forward voltage drop for white LEDs is about 3.0V. You can put
these LEDs in series such that the combined forward voltage ...

On Aug 16, 2006, at 8:36 PM, Robert L. Nuckolls, III wrote:

I'll suggest that a fundamental attribution error
is at work here. OBAM is not exclusive. It simply
acknowledges the fac ...

On Aug 15, 2006, at 7:02 PM, Ron Patterson wrote:

I just finished my RV-4 and used Bob's Z-11 plan with a Battery
Bus, Main Bus and E Bus. Somehow I have them isolated so that the
main wor ...

On Aug 15, 2006, at 3:25 PM, Rodney Dunham wrote:

<rdunhamtn@hotmail.com>

Listers,

I'm installing an XCOM760 and want to know a few things.

1) Can I just leave the intercom in ...

On Aug 15, 2006, at 6:43 AM, Robert L. Nuckolls, III wrote:

Since your personal goals are right in line with the guy
at the 'scope . . . then setting up some protocol for
selection ...

On Aug 14, 2006, at 3:19 PM, <bakerocb@cox.net> wrote:

8/14/2006

Responding to an AeroElectric-List message previously posted by
Brian Lloyd

Hello Brian, Thanks for your inpu ...

On Aug 13, 2006, at 6:33 PM, Doug Windhorn wrote:

<N1DeltaWhiskey@comcast.net>

Brian,

A quick question (I hope) - if the transponder displays what
altitude it is transmitting t ...

On Aug 13, 2006, at 5:06 PM, Bill Denton wrote:

<bdenton@bdenton.com>

"Wire it to your transponder and be happy. Don't worry about the radio
shop."

Since the altimeter/ ...

On Aug 13, 2006, at 5:36 PM, Bill Denton wrote:

<bdenton@bdenton.com>

> From the FAR's, as noted:

----------------------------------------------------------------------
------ ...

On Aug 13, 2006, at 5:03 PM, Rodney Dunham wrote:

<rdunhamtn@hotmail.com>

So........

I've wired my Becker TXPDR with altitude encoding from my Dynon
EFIS in my VFR only Sonex. ...

On Aug 13, 2006, at 1:56 PM, Bill Denton wrote:

<bdenton@bdenton.com>

I think things may have wandered away from the original issue here...

Actually, I think I have hit the real nai ...

On Aug 13, 2006, at 12:56 PM, Dennis Johnson wrote:

Thanks to Brian Lloyd and Bob White for explaining the reason for
resistors when combining stereo signals to a mono audio panel.
It's a ...

[rant-mode]

The thing that I don't understand is why this is such a problem. Just
who do you think is going to crawl under your panel to check to see
if your encoder is TSO'd?

Pick the enc ...

On Aug 12, 2006, at 8:33 PM, europa flugzeug fabrik wrote:

Going from memory here, as Mr. Peshak’s writings are too hard to
follow to read again and to avoid accusation of slander, but he
...

On Aug 12, 2006, at 6:22 PM, Charlie Kuss wrote:

Brian,
The RMI uEncoder is a great addition for the need stated above. I
gives you redundancy for all 3 primary instruments as well as an ...