Matronics Email Lists

I've published the ECB layout and assy data at

Any any assistance in proofing the layout to the
schematic would be appreciated. Will order boards
late tonight.

Got an order about rea ...

[quote="nuckolls.bob(at)aeroelect"]At 05:57 AM 1/25/2024, you wrote:
[quote]--> AeroElectric-List message posted by: "merlewagner2" <wagnermerle>

Thank you so m ...

Bob,

If you send me the schematic I can then make up a board with SMD and have it made by PCBway. They are very cost effective.
As an example the photo is an RF/audio probe I just finished using ...

"Its been a while, but I remember that the key for my ADS-B report was using flight
following. Getting ATC involved. Did you make sure your reg number was set
(instead of anon) ?
Which ADS-B u ...

Not sure if this is relevant to this forum but...
After going thru major fixes on my Tailwind I had a couple of test flights to check things out.

I took a look at Flightaware.com to see the fligh ...

Billski, you can get the Best efficiency with two VOR receivers by using a receive multicoupler. Not typically seen in an aircraft as they are expensive. I just removed mine since I removed both my NA ...

I agree the VHF antenna (without the GS antenna ears) will work very well for receiving the GS freqs.

I wanted to see how the performance could be enhanced with the antenna tuned to the different ...

Bob,

Just took a couple photos of my antenna. I did two calibrations, one for Glide slope and one for Localizer.

Not sure how the photos will come out. These are attached.

I don't remember t ...

I have made homemade antennas in the past and wished that I could measure
the resonate frequency. Does the NANO VNA H4 do that? If that is the only
feature that I want, is there a less expensive ...

telling me to 'buy *this one*). My biggest concern is exactly what
you're describing; I want as dirt-simple a user interface as possible,
and a manual written by an English-as-a-1st-language wri ...

For anyone interested in the VNA-

First educate yourself on what to purchase. There are too many clones out there and you must be very careful in what you purchase. I have 3 different units which ...

Thanks for the info Bob. Any idea if you will come out with the 9004 module in the future? I will go with the warning lite and B&C OV module for now.

Regarding the Grumman - can't remember th ...

Hi Bob,

just starting on the wiring for a rebuild project on a Wittman Tailwind. Installing a Viking Turbo which has an IR alternator. I have looked and searched but can't find any detail about the ...

Bob,You can put me down for one. If I break away from the Tailwind then I can concentrate on another project.

Merle

On Sun, Jul 16, 2017 at 2:59 AM, AeroElectric-List Digest Server <a ...

I would also like to take a look at your setup. I am planning on using an IVO mag prop with in flight adj. Was hoping to do just what you have already done. Way ahead of me!!!!

Merle

I'll be hap ...

Bob,

When you get the new circuit up I would be very interested in purchasing. Have the Ivo mag prop which will be interfacing with a Viking Turbo 170HP. Should be interesting to see the performanc ...

Bob, you can sign me up for 2 boards.

Merle

Bob,

Checkout rfexplorer.com. They have a neat setup for RF analysis using the RF Explorer.

If I wasn't building a spectrum analyzer then this would be my next purchase.

Merle