Matronics Email Lists

I found one of the chandler hangars for sale. It was almost ast much as my current home. I may have to grab a snow bird rental for the summer and look for some thin more permanent when I get there. ...

You might try giving Rob Hickman a call. AFS used to used Crossbows, but the switched to another OEM for a while, and are now using Dynon.

Get From: owner-rv10-list-server@matronics.com ...

Where in Arizona are you located? I’ll be moving out to Surprise in a few months. I’m having a heck of time trying to find someplace to park my RV-10 in the valley.

Get From: owner-rv10 ...

Doc,

Do you have photos, plans, part/vendor list for your tug? I’m looking to build one this year as a winter project. I have been looking at the various units people have built. I like th ...

I recently learned something the hard way. If you have FlyRV10 pins and Aerosport interior panels, there isn’t enough clearance to use the vans supplied magnetic switches.

The magnet in the ...

Hartzell switched to a different product last year, but I don’t know if you can co-mingle the grease. I suspect not.

I made the switch when I had my prop serviced last year.

...

I don’t, but I do have a flat pack Vizion that I’m about ready to post on VAF.

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> on behalf of dlm ...

I disagree. Even if you are careful, there is a small percentage of time that youâ€™ll not hit the hole. Admittedly, Iâ€™ve accidently let the bogart bar slip a couple times a year. After flying ...

I highly recommend their fuel injection class when they start them up again. I was fortunate to have Don balance my injectors after class one day.

Get From: owner-rv10-list-server@matronics ...

Wide Open Throttle

From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> On Behalf Of Robert Jones
Sent: Monday, October 4, 2021 4:52 PM
To: rv10-list@mat ...

Aerosportproducts.com

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> on behalf of David Carr <junk@dcarr.org>
Sent: Sunday, May 30, 2021 ...

122 kts 0 degrees? Shouldnâ€™t that be Vne? 122kts implies itâ€™s going to be raining flaps all over the place. Since most of us cruise at a much higher airspeed. :^)

From: owner-rv ...

I have a pair of them in the back. They were about nine pounds lighter than the pair of Oddessy 680s that I originally installed. I don’t remember their exact weight at the moment. The pair are pr ...

I have had a pair of earthx installed for about three years. I’ve not had any issues and they work as advertised.

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-serve ...

Hereâ€™s a photo of the new grease Hartzell is now using. It appears that itâ€™s only available through Hartzell authorized service centers. The shop I used wanted $20~$25 per tube.

It wo ...

I was surprised with that as well when I had my prop serviced recently. The shop included a tube of the new grease. I have yet to find a source for the new grease other than a prop shop.

A ...

Yes, I had an early Vizion and experienced something similar. Lucas insisted the unit was fine and that they hadn’t had any Vizion issues. He was also insistent that the AFS Arinc unit was the culpr ...

have you talked with a Don Rivera at AirFlow Performance yet? They are in Spartanburg.

Get From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronics.com> on behalf ...

Filed to about a 1/16” gap. Be sure to allow for paint thickness, so my 1/16” gap was probably closer to 1/8” before paint.

Although I do know others that installed a rubber seal too.

...

What EFIS do you have?

With most of the major vendors, you can swap out the Trutrak servos with the EFIS vendor servos for less than$2k. For many of us, that want an option when we built. B ...