Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Reamer for Mod 72

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

DuaneFamly(at)aol.com
Guest

Posted: Tue Mar 06, 2007 10:26 am Post subject: Reamer for Mod 72

Good Day All,

  

 I just received the two metal tubes that I will insert into my upper engine  mounts for my XS. I believe that I read in one of the past emails that some  folks here in the USA have offered to loan out their 16.5 mm reamer to keep  others from having to buy one just for this one task. Is that offer still  available? I am in Northern Calif and can accomplish the task the same day I  receive the reamer and can forward it or return it as needed. 

  

 Has anyone thought about maybe putting together a little kit consisting of  the reamer, a small amount of ACF50, and etch primer paint that could be  circulated to members that might need it. Just a thought.   

 Mike Duane  A207A

Redding, California

XS Conventional Gear

Jabiru 3300  

Sensenich R64Z N

Ground Adjustable  Prop





AOL now offers free email to everyone.  Find out more about what's free from AOL at 657x4311227241x4298082137/aol?redir=http%3A%2F%2Fwww%2Eaol%2Ecom" target="_blank">AOL.com. 

  [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

jimpuglise(at)comcast.net
Guest

Posted: Tue Mar 06, 2007 11:07 am Post subject: Reamer for Mod 72

Mike-

  

 I will shortly be in the same fix.  I just did a web search and found a 16.5 MM reamer at Machine Shop Discount supply for $ 26.85.  For that price, it may just be worth buying one.  

  

 BTW, also doing a Jab. 3300, tri gear.

  

 Jim A-283

  

 [quote]-------------- Original message -------------- 

From: DuaneFamly(at)aol.com 

  Good Day All,

  

 I just received the two metal tubes that I will insert into my upper engine mounts for my XS. I believe that I read in one of the past emails that some folks here in the USA have offered to loan out their 16.5 mm reamer to keep others from having to buy one just for this one task. Is that offer still available? I am in Northern Calif and can accomplish the task the same day I receive the reamer and can forward it or return it as needed. 

  

 Has anyone thought about maybe putting together a little kit consisting of the reamer, a small amount of ACF50, and etch primer paint that could be circulated to members that might need it. Just a thought.   

 Mike Duane A207A

Redding, California

XS Conventional Gear

Jabiru 3300 

Sensenich R64Z N

Ground Adjustable Prop





   AOL now offers free email to everyone. Find out more about what's free from AOL at 657x4311227241x4298082137/aol?redir=http%3A%2F%2Fwww%2Eaol%2Ecom" target="_blank">AOL.com. 

 	  Quote: 	
		  

	
[b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

grahamsingleton(at)btinte
Guest

Posted: Tue Mar 06, 2007 11:40 am Post subject: Reamer for Mod 72

All

has anyone managed to cool a Jab 3300 properly yet? I know a couple who 

haven't but it can only be a matter of persuading the cooling air to go 

through the fins I suspect?

Graham



jimpuglise(at)comcast.net wrote:

 	  Quote: 	
		   Mike-

  

 I will shortly be in the same fix.  I just did a web search and found a 

 16.5 MM reamer at Machine Shop Discount supply for $ 26.85.  For that 

 price, it may just be worth buying one. 

  

 BTW, also doing a Jab. 3300, tri gear.

  

 Jim A-283

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

brian(at)mycarpetsource.c
Guest

Posted: Tue Mar 06, 2007 11:44 am Post subject: Reamer for Mod 72

I have the reamer, be glad to share. Waiting on tubes.

Visit -  www.EuropaOwners.org

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

jimpuglise(at)comcast.net
Guest

Posted: Tue Mar 06, 2007 12:38 pm Post subject: Reamer for Mod 72

Graham-

  

 Andy is marketing his own FWF kit for the 3300 and the comments I have heard are very good.  I think Flight Crafters has installed several quite successfully.  

  

 Jim - A-283

  

  ======  [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

ptag.dev(at)tiscali.co.uk
Guest

Posted: Tue Mar 06, 2007 2:28 pm Post subject: Reamer for Mod 72

Graham,

Like Tommy Cooper said "Just like that ", took me 6b.... years of

fannying about and the last flight was the most uniform across all 6

cylinders.... then the bloody nose wheel fell off !

Yes in principle you are correct  "persuading " is near the mark but you

missed the last sentence......"and having enough left to cool No's 5 and

6!"



Bob H G-PTAG



Do not archive.

--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

grahamsingleton(at)btinte
Guest

Posted: Tue Mar 06, 2007 2:34 pm Post subject: Reamer for Mod 72

Thanks Jim

There are some guys who bought one with no involvement in the build and 

I hear that the rate of climb is only 300 fpm and it overheats at that. 

Something badly wrong there. I'll chase up Flightcrafters if they 

approach me for help.

AFAIK there is only one successful Jab Europa over here.

Graham



jimpuglise(at)comcast.net wrote:

 	  Quote: 	
		   Graham-

  

 Andy is marketing his own FWF kit for the 3300 and the comments I have 

 heard are very good.  I think Flight Crafters has installed several 

 quite successfully. 

  

 Jim - A-283

  

 ======

 

 *

 

 

 *


	


-- 

Graham Singleton



Tel: +441629820187

Mob: +447739582005

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

h&jeuropa

Joined: 07 Nov 2006
Posts: 649

Posted: Fri Mar 09, 2007 5:18 am Post subject: Re: Reamer for Mod 72

Hi All,



We mailed our reamer to Mike yesterday.  We'd like to keep it moving to the next person who has everything ready to go.  Please email us off-list europa(at)triton.net to be scheduled.



Jim & Heather Butcher

do not archive

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

h&jeuropa

Joined: 07 Nov 2006
Posts: 649

Posted: Sun Apr 01, 2007 3:52 am Post subject: Re: Reamer for Mod 72

Our reamer will be available this week.  If you have the parts and are ready to install, contact us off list if you would like to borrow it.



Jim & Heather Butcher N241BW

europa(at)triton.net

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum