 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
n100rh(at)sbcglobal.net
Guest
|
 Posted: Wed May 23, 2007 6:37 am Post subject: wiring up regulator, help! |
 |
|
Uncle!
I must be a total retard, I am so confused by the wiring of my 914... help!
As back ground information, I have a Control Vision Corp. EXP BUS 2 with
two batteries.
The current (sic) problem is not understanding how to wire up the
regulator at points R, B+, C. And, what to do with the capacitor. What
size wire, wires? come out of R and B+.
Can anyone direct me to another reference other than the Rotax manual
Thanks, anyone know a good counselor ?
Ralph
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
jodel(at)nildram.co.uk
Guest
|
|
| Back to top |
|
|
josok-e(at)ukolo.fi
Guest
|
| Posted: Wed May 23, 2007 10:11 am Post subject: wiring up regulator, help! |
|
|
Hi Ralph,
If you have are using the rotax standard alternator regulator combination, the R, B+ and C termanals are to be connected together.
Also the capacitor +! goes there.
Regards,
Jos Okhuijsen
Visit - www.EuropaOwners.org
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
nwcmc(at)tiscali.co.uk
Guest
|
| Posted: Wed May 23, 2007 10:50 am Post subject: wiring up regulator, help! |
|
|
On request from another builder I produced a diagram for an ExpbusII. I
have slightly downsized the attachment to comply with the forum
restrictions. If anyone wants an original contact me off forum.
Nigel Charles
--
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
| Filesize: |
257.37 KB |
| Viewed: |
235 Time(s) |
|
|
|
| Back to top |
|
|
hansjd(at)online.no
Guest
|
| Posted: Wed May 23, 2007 10:57 am Post subject: wiring up regulator, help! |
|
|
Hi Ralph.
I had the same problem - 914/Expbus. Made contact with Nigel Charles - who
very kindly constructed my system.
It's based on the Expbus wiring diagram and built up to my specifications.
Nigel has since laid it out in the Europa Flyer (issue 45, June 2005).
If you don't have this magazine, I'm sure Nigel will send you a copy of the
diagram.
Hope this helps
Hans
---
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
n100rh(at)sbcglobal.net
Guest
|
| Posted: Wed May 23, 2007 11:25 am Post subject: wiring up regulator, help! |
|
|
Oops,
I see what has been in front of me all along. It's tough having ADDS.
The schematic even show the proper wire size... oh well. Sorry, I will
try to have a much harder question next time.
Thanks again to all,
Ralph
josok wrote:
| Quote: |
Hi Ralph,
If you have are using the rotax standard alternator regulator combination, the R, B+ and C termanals are to be connected together.
Also the capacitor +! goes there.
Regards,
Jos Okhuijsen
Visit - www.EuropaOwners.org
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
n100rh(at)sbcglobal.net
Guest
|
| Posted: Wed May 23, 2007 4:30 pm Post subject: wiring up regulator, help! |
|
|
Hans and all,
Thanks very much for the help, I seem to be over my mental block and
moving forward again. This has always been such a great group people.
Thanks,
Ralph
Hans J. Danielsen wrote:
[quote]
Hi Ralph.
I had the same problem - 914/Expbus. Made contact with Nigel Charles -
who very kindly constructed my system.
It's based on the Expbus wiring diagram and built up to my
specifications. Nigel has since laid it out in the Europa Flyer (issue
45, June 2005).
If you don't have this magazine, I'm sure Nigel will send you a copy
of the diagram.
Hope this helps
Hans
---
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
