  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		tjs22t(at)verizon.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 26, 2008 11:50 am    Post subject: two questions | 
				     | 
			 
			
				
  | 
			 
			
				Pete and Andy,
   
  I have one of the first fwf  kits for 3300 into Zenith 601.  This is the one with the large (too large)  airbox that we had to make some mods to in the linkage and fit it up under the  firewall shelf.  What auto airfilter is used in that box?  Is there a  K&N filter that those of us with that airbox can use?  Any  numbers?  You handle it?
   
  Second, Andy I can remember  you writing in detail about the Odyssey batteries and their rather finicky ways  when it comes to charging.  I have a 625 that is presently on the table in  the hangar, used very little because it was no improvement over the cheap 17amh  batteries from Batteries.com.  Is there hope for this battery (maybe too  old) if I get a "correct" charger for the Odyssey line.  On the old  yahoojabbytalk list you once wrote of a charger that had impressed you - mind  briefly repeating that?
   
  I have the old small  starter (engine 051) and starts in cold wx are fine with the usual preheat  routine done in the hangar, however the beast leaves us down if we fly for food  and allow it to sit too long.  Am I looking at the newer, larger  starter?..and how much does that run pricewise?
   
  thanks  jeff  small HDS/3300 315 hours
     [quote][b]
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Jim McCormick
 
 
  Joined: 19 Mar 2007 Posts: 18 Location: Fresno, CA
  | 
		
			
				 Posted: Tue Feb 26, 2008 1:05 pm    Post subject: two questions | 
				     | 
			 
			
				
  | 
			 
			
				Hi  Jeff
   
  The  K&N 33-2031-2 fits in the large Jabiru air  box.
   
  As  far as charging the battery I would recommend you put a 10 amp charger on  it and charge it till you reach 14.9 volts on a DVM, the turn the charger  off!
  Don't  charge it past 15 volts.
   
  The  current starters are $543.00
   
  
 Jim McCormick
 Jabiru Pacific LLC
 255 W Fallbrook  202B
 Fresno, CA 93711
 Office 559-431-1701
 Fax  559-233-3676
 www.jabirupacific.com  [quote]   --
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		imap8ntr(at)cox.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 26, 2008 3:33 pm    Post subject: two questions | 
				     | 
			 
			
				
  | 
			 
			
				Jeff, Jim
  I have the Odyssey PC625 on my  3300, 20aH.  I was also told not to charge it above 15v charger becasue the  AGM battery would be ruined.  They told me to get a 3 phase charger such as  any Odyssey and not a bulk charger like an automobile charger.  I got the  Odyssey 12Amp battery charger which tops off the battery automatically without  going above 14.7v.  I think this charger is great for the money (at) $85 with  shipping.  They have slower chargers for less but I wanted one that can do  my battery while I am doing the preflight check.  I called Odyssey   and their technical support is great and they told me what to do.
   
  Ivan
  [quote]   ---
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Mark Phillips in TN
 
 
  Joined: 10 Jan 2006 Posts: 431 Location: Columbia, TN
  | 
		 | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Jim McCormick
 
 
  Joined: 19 Mar 2007 Posts: 18 Location: Fresno, CA
  | 
		
			
				 Posted: Tue Feb 26, 2008 6:25 pm    Post subject: two questions | 
				     | 
			 
			
				
  | 
			 
			
				Hi  Ivan
   
  Thank  your for the info!
   
  
 Jim McCormick
 Jabiru Pacific LLC
 255 W Fallbrook  202B
 Fresno, CA 93711
 Office 559-431-1701
 Fax  559-233-3676
 www.jabirupacific.com  [quote]   --
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		imap8ntr(at)cox.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 26, 2008 7:27 pm    Post subject: two questions | 
				     | 
			 
			
				
  | 
			 
			
				Jim
  No problem.  You have been a  great help to us all many times.
   
  Thanks
  Ivan
  [quote]   ---
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |