Matronics Email Lists :: View topic - Trim servo cable routing

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Trim servo cable routing

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

dean.psiropoulos(at)veriz
Guest

Posted: Mon Jul 14, 2008 9:37 pm Post subject: Trim servo cable routing

Little items on the way to first flight... Installing the electric elevator

trim servo, I was planning on using the existing trim cable hole in the

elevator spar to route the 5 wire MAC cable out to the horizontal stab and

into the fuselage.  But....the MAC servo jackscrew sticks out of the back of

the servo and into that hole also.  There seems to be enough clearance but

I'd rather not have the jackscrew impinge on the cable and wear it through,

shorting out the trim motor.  Since I'm using the Mac (Ray Allen)cable with

the tiny little wires it's probably a moot point but... Is this a non issue?

Any other routing ideas?  I rather not drill any more holes in the elevator

spar web if I can help it.  Thanks.



Dean Psiropoulos

RV-6A  N197DM

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum