Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Bucking

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
rwhunter(at)integra.net
Guest





PostPosted: Mon Jan 26, 2009 9:40 am    Post subject: Bucking Reply with quote

Hey All,
I am riveting the bottom flange of the fwd and mid fuselage bulkheads.
Page 28-14 steps 1 and 3. What kind of bucking bar did you use to get
under the seat rails? Or is it possible to use a pulled rivet in those
areas? If so what kind of pulled rivet? You think by this stage I
could figure this out!

Rob Hunter
40432
Fuselage


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jeff(at)westcottpress.com
Guest





PostPosted: Mon Jan 26, 2009 10:08 am    Post subject: Bucking Reply with quote

Hi Rob,

I set the fuse on a back riveting plate and used some shims to be
sure the weight was focused on those rivets, then back riveted using
an "L" shaped rivet set that I bought surplus about 15 years ago.
There are only a few other spots, in my view, that compete with this
one for degree of difficulty... but you can get it done.

Jeff Carpenter
40304
Metal Work Complete
Staring the big fiberglass monster in the face
On Jan 26, 2009, at 9:37 AM, Rob Hunter wrote:

Quote:


Hey All,
I am riveting the bottom flange of the fwd and mid fuselage bulkheads.
Page 28-14 steps 1 and 3. What kind of bucking bar did you use to get
under the seat rails? Or is it possible to use a pulled rivet in
those
areas? If so what kind of pulled rivet? You think by this stage I
could figure this out!

Rob Hunter
40432
Fuselage


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group