 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
kearney
Joined: 20 Sep 2008
Posts: 563
|
 Posted: Sat Nov 21, 2009 3:20 pm Post subject: Odd Firewall Rivet Question |
 |
|
Hi
Ages ago, when I completed section 27 – Firewall, I left 4 rivets open that did not show on the plans. Just inboard of the engine mount bolt holes on the WD-1002 / 1003 L&R engine mounts there is a #30 hole. This hole is found in both the firewall and on the engine mounts. Strangely, this “extra” hole is shown on the WD-1002-R-PC on page 27-2 (fig 2) of Rev 0 of the plans. It does not appear anywhere else in the plans (that I can find).
The rivet call outs on page 27-5 does not reference this hole nor is an AN426-AD4-5 rivet, the longest callout in the plans, long enough to fill the hole.
Before I fill these four holes with a longer rivet, can anyone tell me what their plans indicate?
Inquiring minds need to know.
Cheers
Les
#40643
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
rv10rob(at)gmail.com
Guest
|
| Posted: Sun Nov 22, 2009 12:29 pm Post subject: Odd Firewall Rivet Question |
|
|
Les, on mine (QB from early 2008), I have empty holes in the WD-1002/3, but no corresponding hole in the firewall. This is consistent with my plans (rev 0).
-Rob
On Sat, Nov 21, 2009 at 3:02 PM, Les Kearney <kearney(at)shaw.ca (kearney(at)shaw.ca)> wrote:
| Quote: |
Hi
Ages ago, when I completed section 27 – Firewall, I left 4 rivets open that did not show on the plans. Just inboard of the engine mount bolt holes on the WD-1002 / 1003 L&R engine mounts there is a #30 hole. This hole is found in both the firewall and on the engine mounts. Strangely, this “extra” hole is shown on the WD-1002-R-PC on page 27-2 (fig 2) of Rev 0 of the plans. It does not appear anywhere else in the plans (that I can find).
The rivet call outs on page 27-5 does not reference this hole nor is an AN426-AD4-5 rivet, the longest callout in the plans, long enough to fill the hole.
Before I fill these four holes with a longer rivet, can anyone tell me what their plans indicate?
Inquiring minds need to know.
Cheers
Les
#40643
| Quote: |
"_blank">www.aeroelectric.com
.com/" target="_blank">www.buildersbooks.com
="_blank">www.homebuilthelp.com
_blank">http://www.matronics.com/contribution
get="_blank">http://www.matronics.com/Navigator?RV10-List
ttp://forums.matronics.com
|
|
--
Rob Kochman
RV-10 "Finishing" Kit
Woodinville, WA (near Seattle)
http://kochman.net/N819K
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
