Matronics Email Lists :: View topic - 43o Card Edge Connector

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

43o Card Edge Connector

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

schmoboy

Joined: 26 Feb 2006
Posts: 130

Posted: Sat May 10, 2014 2:36 pm Post subject: 43o Card Edge Connector

I'm looking for help on what orientation the card edge connector used 

for shield termination on the back of a Garmin 430 should be inserted.



It's a Garmin 336-00029-00 or AMP 583853-4 card edge connector. It has a 

"spring" side and a "barb" side.  Not sure what to actually call them 

and that's the best I can do. 



Should the "barb" side face in, up, out or down in relation to the 

termination block when inserting on the back of the 430?



Thanks,



-Sean

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

tim2542(at)sbcglobal.net
Guest

Posted: Sat May 10, 2014 4:28 pm Post subject: 43o Card Edge Connector

Can't answer your question, but FWIW, I don't use it. I really like Bob's avionics ground bus, I use one mounted close to the back of the radio stack. 

Tim



 	  Quote: 	
		   On May 10, 2014, at 3:35 PM, Sean Stephens <sean(at)stephensville.com> wrote:

 

 

 

 I'm looking for help on what orientation the card edge connector used for shield termination on the back of a Garmin 430 should be inserted.

 

 It's a Garmin 336-00029-00 or AMP 583853-4 card edge connector. It has a "spring" side and a "barb" side.  Not sure what to actually call them and that's the best I can do. 

 

 Should the "barb" side face in, up, out or down in relation to the termination block when inserting on the back of the 430?

 

 Thanks,

 

 -Sean

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

schmoboy

Joined: 26 Feb 2006
Posts: 130

Posted: Mon May 12, 2014 9:27 am Post subject: 43o Card Edge Connector

For those interested, I found the answer.



The "spring" side of the connector is oriented on the inside of the 

termination block so it contacts the "card edge".



 	  Quote: 	
		   Tim Andres <mailto:tim2542(at)sbcglobal.net>

 May 10, 2014 at 7:26 PM

 

 <tim2542(at)sbcglobal.net>



 Can't answer your question, but FWIW, I don't use it. I really like 

 Bob's avionics ground bus, I use one mounted close to the back of the 

 radio stack.

 Tim

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum