Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Yak-List:

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

jbsoar(at)gmail.com
Guest

Posted: Sat Jun 25, 2016 6:21 pm Post subject: Yak-List:

The little one fits the 55, right?If someone just wants the big one, I might be interested in the little one, assuming it fits.

The wheel/brake installation was just finished! Â 

Any progress on the tailwheel project?

Thank you!

john b

On Sat, Jun 25, 2016 at 6:33 PM, John Warwick <john.warwick1(at)gmail.com (john.warwick1(at)gmail.com)> wrote:

 	  Quote: 	
		  Yak 52 Air Bottles.Â 

Fresh HydroÂ Good through May 2021.Â 

TestedÂ by Compressed Gas Systems in Los Angeles.Â 

Paperwork included, see third picture.

Technician reported internal surfaces were both above average.Â 

Removed from a Yak 52 that has stood unpressurised since 2002

Tanks sold as a pair. Please contact me off list.Â

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

L29delfin(at)yahoo.com
Guest

Posted: Fri Jul 08, 2016 7:47 am Post subject: Yak-List:

Can someone provide the lenght and size in metric for the screws used to attach the upper gap seals between wing and fuselage yak 52. Also the orignal part number.   These are small steel slot head screws. Thanks

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dsavarese0812(at)bellsout
Guest

Posted: Fri Jul 08, 2016 8:27 am Post subject: Yak-List:

I don't have the part number.  We replace these screws with4mm x 12mm or 

13mm metric Philips Truss Head screws. I'm sure you can find the same 

size slot head screws in steel instead of stainless.

/-- //

/

//A. Dennis Savarese //

//334-546-8182 (mobile)//

//www.yak-52.com //

//Skype - Yakguy1//

On 7/8/2016 11:49 AM, Robert Schwartz wrote:

 	  Quote: 	
		  

 Can someone provide the lenght and size in metric for the screws used 

 to attach the upper gap seals between wing and fuselage yak 52. Also 

 the orignal part number.   These are small steel slot head screws. Thanks

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

pa3arw(at)ziggo.nl
Guest

Posted: Fri Jul 08, 2016 9:33 am Post subject: Yak-List:

And I have changed them into stainless torx because these are stronger and

better suited for electric screwdrivers....



Hans O.

PH-YAK 

Op 08-07-16 18:27, A. Dennis Savarese <dsavarese0812(at)bellsouth.net> schreef:



 	  Quote: 	
		   

 <dsavarese0812(at)bellsouth.net>

 

 I don't have the part number.  We replace these screws with4mm x 12mm or

 13mm metric Philips Truss Head screws. I'm sure you can find the same

 size slot head screws in steel instead of stainless.

 /-- //

 /

 //A. Dennis Savarese //

 //334-546-8182 (mobile)//

 //www.yak-52.com //

 //Skype - Yakguy1//

 On 7/8/2016 11:49 AM, Robert Schwartz wrote:

> 

> Can someone provide the lenght and size in metric for the screws used

> to attach the upper gap seals between wing and fuselage yak 52. Also

> the orignal part number.   These are small steel slot head screws. Thanks

> 

> 

>

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

yaknorway52(at)gmail.com
Guest

Posted: Fri Jul 08, 2016 10:22 am Post subject: Yak-List:

Hans,



Do you have link to supplier you use for Torx screws?



Br

Havard



Sendt fra min iPhone



 	  Quote: 	
		   Den 8. jul. 2016 kl. 19.32 skrev Hans Oortman <pa3arw(at)ziggo.nl>:

 

 

 

 And I have changed them into stainless torx because these are stronger and

 better suited for electric screwdrivers....

 

 Hans O.

 PH-YAK 

 

 

 Op 08-07-16 18:27, A. Dennis Savarese <dsavarese0812(at)bellsouth.net> schreef:

 

> 

> <dsavarese0812(at)bellsouth.net>

> 

> I don't have the part number.  We replace these screws with4mm x 12mm or

> 13mm metric Philips Truss Head screws. I'm sure you can find the same

> size slot head screws in steel instead of stainless.

> /-- //

> /

> //A. Dennis Savarese //

> //334-546-8182 (mobile)//

> //www.yak-52.com //

> //Skype - Yakguy1//

>> On 7/8/2016 11:49 AM, Robert Schwartz wrote:

>> 

>> Can someone provide the lenght and size in metric for the screws used

>> to attach the upper gap seals between wing and fuselage yak 52. Also

>> the orignal part number.   These are small steel slot head screws. Thanks

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dougsappllc(at)gmail.com
Guest

Posted: Fri Jul 08, 2016 10:30 am Post subject: Yak-List:

I do not carry the SS torx, but do have the SS low profile phillips 4 and 5 mm screws in stock.



Doug

On Fri, Jul 8, 2016 at 11:21 AM, HÃ¥vard Dale <yaknorway52(at)gmail.com (yaknorway52(at)gmail.com)> wrote:

 	  Quote: 	
		  --> Yak-List message posted by: =?utf-8?Q?H=C3=A5vard_Dale?= <yaknorway52(at)gmail.com (yaknorway52(at)gmail.com)>

 

 Hans,

 

 Do you have link to supplier you use for Torx screws?

 

 Br

 Havard

 

 Sendt fra min iPhone

 

 > Den 8. jul. 2016 kl. 19.32 skrev Hans Oortman <pa3arw(at)ziggo.nl (pa3arw(at)ziggo.nl)>:

 >

 > --> Yak-List message posted by: Hans Oortman <pa3arw(at)ziggo.nl (pa3arw(at)ziggo.nl)>

 >

 > And I have changed them into stainless torx because these are stronger and

 > better suited for electric screwdrivers....

 >

 > Hans O.

 > PH-YAK

 >

 >

 > Op 08-07-16 18:27, A. Dennis Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)> schreef:

 >

 >> --> Yak-List message posted by: "A. Dennis Savarese"

 >> <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)>

 >>

 >> I don't have the part number.Â  We replace these screws with4mm x 12mm or

 >> 13mm metric Philips Truss Head screws. I'm sure you can find the same

 >> size slot head screws in steel instead of stainless.

 >> /-- //

 >> /

 >> //A. Dennis Savarese //

 >> //[url=tel:334-546-8182]334-546-8182[/url] (mobile)//

 >> //www.yak-52.com //

 >> //Skype - Yakguy1//

 >>> On 7/8/2016 11:49 AM, Robert Schwartz wrote:

 >>>

 >>> Can someone provide the lenght and size in metric for the screws used

 >>> to attach the upper gap seals between wing and fuselage yak 52. Also

 >>> the orignal part number.Â  Â These are small steel slot head screws. Thanks

 >

 >

 >

 >

 >

 >

 

 

 ===========

 List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Yak-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

 Â  Â  Â  Â  Â  -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

pa3arw(at)ziggo.nl
Guest

Posted: Fri Jul 08, 2016 11:52 am Post subject: Yak-List:

Here it is:



http://www.borenco.nl/c/1_208_7295/bevestigingsmaterialen/torx-schroeven/laa

gbolkopschroeven-torx-iso-7380f-a2/



Hans O.



Op 08-07-16 20:21, Håvard Dale <yaknorway52(at)gmail.com> schreef:



 	  Quote: 	
		   

 <yaknorway52(at)gmail.com>

 

 Hans,

 

 Do you have link to supplier you use for Torx screws?

 

 Br

 Havard

 

 Sendt fra min iPhone

 

> Den 8. jul. 2016 kl. 19.32 skrev Hans Oortman <pa3arw(at)ziggo.nl>:

> 

> 

> 

> And I have changed them into stainless torx because these are stronger and

> better suited for electric screwdrivers....

> 

> Hans O.

> PH-YAK 

> 

> 

> Op 08-07-16 18:27, A. Dennis Savarese <dsavarese0812(at)bellsouth.net> schreef:

> 

>> 

>> <dsavarese0812(at)bellsouth.net>

>> 

>> I don't have the part number.  We replace these screws with4mm x 12mm or

>> 13mm metric Philips Truss Head screws. I'm sure you can find the same

>> size slot head screws in steel instead of stainless.

>> /-- //

>> /

>> //A. Dennis Savarese //

>> //334-546-8182 (mobile)//

>> //www.yak-52.com //

>> //Skype - Yakguy1//

>>> On 7/8/2016 11:49 AM, Robert Schwartz wrote:

>>> 

>>> Can someone provide the lenght and size in metric for the screws used

>>> to attach the upper gap seals between wing and fuselage yak 52. Also

>>> the orignal part number.   These are small steel slot head screws. Thanks

> 

> 

> 

> 

> 

>

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Dawg

Joined: 19 May 2013
Posts: 355

Posted: Fri Jul 08, 2016 4:12 pm Post subject: Yak-List:

Makes perfect sense to me???

 	  Quote: 	
		   On Jul 8, 2016, at 13:52, Hans Oortman <pa3arw(at)ziggo.nl> wrote:

 

 

 

 Here it is:

 

 http://www.borenco.nl/c/1_208_7295/bevestigingsmaterialen/torx-schroeven/laa

 gbolkopschroeven-torx-iso-7380f-a2/

 

 Hans O.

 

 Op 08-07-16 20:21, Håvard Dale <yaknorway52(at)gmail.com> schreef:

 

> 

> <yaknorway52(at)gmail.com>

> 

> Hans,

> 

> Do you have link to supplier you use for Torx screws?

> 

> Br

> Havard

> 

> Sendt fra min iPhone

> 

>> Den 8. jul. 2016 kl. 19.32 skrev Hans Oortman <pa3arw(at)ziggo.nl>:

>> 

>> 

>> 

>> And I have changed them into stainless torx because these are stronger and

>> better suited for electric screwdrivers....

>> 

>> Hans O.

>> PH-YAK 

>> 

>> 

>> Op 08-07-16 18:27, A. Dennis Savarese <dsavarese0812(at)bellsouth.net> schreef:

>> 

>>> 

>>> <dsavarese0812(at)bellsouth.net>

>>> 

>>> I don't have the part number.  We replace these screws with4mm x 12mm or

>>> 13mm metric Philips Truss Head screws. I'm sure you can find the same

>>> size slot head screws in steel instead of stainless.

>>> /-- //

>>> /

>>> //A. Dennis Savarese //

>>> //334-546-8182 (mobile)//

>>> //www.yak-52.com //

>>> //Skype - Yakguy1//

>>>> On 7/8/2016 11:49 AM, Robert Schwartz wrote:

>>>> 

>>>> Can someone provide the lenght and size in metric for the screws used

>>>> to attach the upper gap seals between wing and fuselage yak 52. Also

>>>> the orignal part number.   These are small steel slot head screws. Thanks

>> 

>> 

>> 

>> 

>> 

>> 

> 

> 

> 

> 

>

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
Dawg

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum