 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
lwinger
Joined: 21 Jun 2006
Posts: 229
Location: Tustin, CA
|
 Posted: Sat Sep 09, 2006 10:53 am Post subject: Craftsman Drill Press sale |
 |
|
For all builders, especially scratch builders, Sears has an online sale that ends today on their 10 in. 2/3 hp Drill Press with Laser. It is normally $119.99, but through today it is $99.99. I'm picking mine up at the local Sears store, but they are even offering a free shipping rebate as well.
I know at least one builder who is using this with great success, especially on critical parts like the spars. The laser alignment seems to be working well for him.
Craftsman 10 in. Drill Press with Laser
Mfr. Model #: 21900 00921900000 $99.99
LaserTrac™ - projects X and Y axis laser lines for accurate pre-alignment of drilling location
Quick release table elevation - Effortlessly raise, lower and make fine adjustments to the worktable
On/Off Switch With Removable Locking Key - Switch is easy to use and removable key helps prevent unauthorized usage
Beveling Table - 7-5/8 x 6-1/2 in. table will bevel 45-deg. and swivel 360-deg.
Fence And Stop Block Included - Fence and stop block help to secure the workpeice. Stop block aids in repetitive drilling
Depth Adjustment Rod - Sets the dept of the drill bit for repetitive drilling
Cast Iron Table And Base - Cast iron adds strength, stability, and support
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
Larry Winger
Tustin, CA
Plans building 601XL/650 with Corvair
Installing fuel system
www.mykitlog.com/lwinger |
|
| Back to top |
|
 |
gboothe(at)calply.com
Guest
|
| Posted: Sat Sep 09, 2006 4:50 pm Post subject: Craftsman Drill Press sale |
|
|
Does Sears have strippers?
Gary Boothe
Cool, CA
601 HDSTD, WW Conversion
Tail done, wings done, working on c-section
For all builders, especially scratch builders, Sears has an online sale that
ends today on their 10 in. 2/3 hp Drill Press with Laser. It is normally
$119.99, but through today it is $99.99. I'm picking mine up at the local
Sears store, but they are even offering a free shipping rebate as well.
I know at least one builder who is using this with great success, especially
on critical parts like the spars. The laser alignment seems to be working
well for him.
Craftsman 10 in. Drill Press with Laser
Mfr. Model #: 21900 00921900000 $99.99
--------
Larry Winger
Tustin, CA
601XL #6493 from scratch
Rudder completed -- drilling stab spars
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=60625#60625
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
naumuk(at)alltel.net
Guest
|
| Posted: Sat Sep 09, 2006 7:07 pm Post subject: Craftsman Drill Press sale |
|
|
Gary-
All kinds, depending on your particular need.
do not archive
Bill Naumuk
HDS Fuselage
Townville, Pa
---
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
NYTerminat(at)aol.com
Guest
|
| Posted: Sat Sep 09, 2006 7:49 pm Post subject: Craftsman Drill Press sale |
|
|
No, just green scotchbrite pads
do not archive
In a message dated 9/9/2006 8:51:06 P.M. Eastern Daylight Time, gboothe(at)calply.com writes:
| Quote: | --> Zenith-List message posted by: "Gary Boothe" <gboothe(at)calply.com>
Does Sears have strippers?
Gary Boothe
Cool, CA
601 HDSTD, WW Conversion
Tail done, wings done, working on c-section
--> Zenith-List message posted by: "lwinger" <larrywinger(at)gmail.com>
For all builders, especially scratch builders, Sears has an online sale that
ends today on their 10 in. 2/3 hp Drill Press with Laser. It is normally
$119.99, but through today it is $99.99. I'm picking mine up at the local
Sears store, but they are even offering a free shipping rebate as well.
I know at least one builder who is using this with great success, especially
on critical parts like the spars. The laser alignment seems to be working
well for him.
Craftsman 10 in. Drill Press with Laser
Mfr. Model #: 21900 00921900000 $99.99
|
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
ggower_99(at)yahoo.com
Guest
|
| Posted: Sun Sep 10, 2006 8:28 pm Post subject: Craftsman Drill Press sale |
|
|
Lets ALL take it with humor
Is a fact.... Scotch Brite and Strippers will be part of this great list for ever.
Here we say (hope I can translate to english):
If your AKA name makes you angy... is a good one and will be with you for life.
Please put a little humor on top of any building frustration... Will make building and flying our airplanes a joy.
Saludos
Gary Gower.
Flying from Chapala, Mexico.
Gary Boothe <gboothe(at)calply.com> wrote: | Quote: | --> Zenith-List message posted by: "Gary Boothe"
Does Sears have strippers?
Gary Boothe
Cool, CA
601 HDSTD, WW Conversion
Tail done, wings done, working on c-section
|
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
601zv(at)ritternet.com
Guest
|
| Posted: Mon Sep 11, 2006 6:20 pm Post subject: Craftsman Drill Press sale |
|
|
Gary,
I always enjoy and appreciate the valuable contributions you make to the list. I have come to recognize your "style" of writing to the extent that I know it is you that is responding without having to check who the message is from. I'm sure others who have monitored the list for a long time, similarly do also. But I think I can speak for all of us in saying that all of your posts are always very clear and easy to understand. So keep it up - your contributions to the list are most welcome and much appreciated!
But, in continuing with the humerous part, I must say that, as we say here, "you left yourself wide open", hence I must ask, what is your AKA or "nickname?"
Robin in AR
N601ZV Zen-Vair with Wynne-Vair 290
90% done, 90% to go, flight to Chapala planned
Do not archive.
[quote] ---
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
Ron Lendon
Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI
|
| Posted: Tue Sep 12, 2006 5:39 pm Post subject: Re: Craftsman Drill Press sale |
|
|
Larry,
Thanks for the notice of the Sears sale. Picked one up today after looking at the other places, Lowes, Home Depot, Harbor Freight. It should come in real handy for making the wing spars.
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/ |
|
| Back to top |
|
|
brothapig(at)HOTMAIL.COM
Guest
|
| Posted: Tue Sep 12, 2006 6:12 pm Post subject: Craftsman Drill Press sale |
|
|
I picked one up myself for the same reason. So far it's doing a great job,
although I'm still trying to determine if the laser sight is saving time or
not. Thanks for the notice!
----Original Message Follows----
From: "Ron Lendon" <rlendon(at)comcast.net>
Reply-To: zenith-list(at)matronics.com
To: zenith-list(at)matronics.com
Subject: Re: Craftsman Drill Press sale
Date: Tue, 12 Sep 2006 18:39:10 -0700
Larry,
Thanks for the notice of the Sears sale. Picked one up today after looking
at the other places, Lowes, Home Depot, Harbor Freight. It should come in
real handy for making the wing spars.
--------
Ron Lendon, Clinton Township, MI
Corvair Zodiac XL, ScrapBuilder 
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=61292#61292
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
lwinger
Joined: 21 Jun 2006
Posts: 229
Location: Tustin, CA
|
| Posted: Tue Sep 12, 2006 9:52 pm Post subject: Re: Craftsman Drill Press sale |
|
|
Glad the info helped. Thanks go to Dave Clay for putting me onto this model. I just found the sale. After a few tries at adjusting the lasers, I'm finding they really save me time and give me greater confidence when drilling those critical parts.
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
Larry Winger
Tustin, CA
Plans building 601XL/650 with Corvair
Installing fuel system
www.mykitlog.com/lwinger |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
