Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

vacuum problems

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

danny shepherd

Joined: 27 Jan 2006
Posts: 117
Location: north Wales, United Kingdom

Posted: Tue Sep 12, 2006 5:02 am Post subject: vacuum problems

Hi All,

          Just started plumbing the vacuum system. I find I'm having 

problems fitting the connectors to the back of the AH and the DI. I'm 

using falcon gauges, GH02V-3 and DG02V-3. also the vacuum pump kit 

supplied by Europa.  fitting the connector on the inlet  on the AH  

would touch the firewall and therefore the pipe would bend and restrict 

the vacuum. The connectors for the DI have"T" pieces on then to connect 

to the gauge, I can screw one in but the "T" piece stops me screwing in 

the other. Hope this makes sense. Those who have done this job will 

probably understand what I'm going on about.

Any ideas and help would be most welcome.



Danny  G-c.e.r.i

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

ward.t(at)xtra.co.nz
Guest

Posted: Tue Sep 12, 2006 12:58 pm Post subject: vacuum problems

Danny,

Long time ago since doing it however I think I used elbows (90 degree 

connectors).

Cheers,

Tim

Tim Ward

12 Waiwetu Street,

Fendalton,

Christchurch, 8052

New Zealand



Ph +64 3 3515166

Mobile 021 0640221

ward.t(at)xtra.co.nz

---

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Roger.Mills(at)btinternet
Guest

Posted: Thu Sep 14, 2006 1:20 am Post subject: vacuum problems

Danni,  

I recall I had a similar problem but used 90 degree bends and had to shorten the last one fitted to allow it to clear the first one when screwing it in.  

Regards  

Roger Mills  

G-BVUV  

       [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

danny shepherd

Joined: 27 Jan 2006
Posts: 117
Location: north Wales, United Kingdom

Posted: Thu Sep 14, 2006 1:58 am Post subject: vacuum problems

Thanks Tim/Roger,

                             I've spoken to Roger at Europa this 

morning, Hes going to get me some 90 degree bends and 2 "t" pieces I can 

place further down the line to connect to the gauge. that should work. 

we hope...............



Cheers Danny G-c.e.r.i.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum