Matronics Email Lists :: View topic - brake master cylinder, bungee cord

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

brake master cylinder, bungee cord

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

klaus.dietrich(at)oracle.
Guest

Posted: Tue Sep 19, 2006 6:13 am Post subject: brake master cylinder, bungee cord

during my annual (950hrs) I have discovered that my bungee cord is getting a little tired...

 anybody knows the diameter (in inches) and the length, so I can order it from Spruce?

 

 It seems I would also need a new brake master cylinder (Monowheel MkI) as mine doesn't come back easily once released after applying brake pressure; is anyone (who modified to trigear) selling his one? Or any clue where to purchase a new cylinder?

 

 Thanks!

 Klaus

 -- 

  vCard                                                                                                                                                                                                                 Klaus Dietrich                                                                                                 Oracle Financing EMEA

 Tel/Fax: +43 1 33 777 825                         http://eofd.oraclecorp.com                                                                                                                                                                                                                     document.write("")

                 

 

    [quote][b]

roger(at)middlecave.plus.
Guest

Posted: Tue Sep 19, 2006 9:08 am Post subject: brake master cylinder, bungee cord

Klaus,

  

 As a  last resort, if all else fails, and no other avenue is available, you could try  Europa!

  

 Roger

 [quote]   --

fklein(at)orcasonline.com
Guest

Posted: Tue Sep 19, 2006 10:07 am Post subject: brake master cylinder, bungee cord

Roger,



Nice to hear a voice from Europa 04 chime in on this forum...How about 

an update to the group on current news, sales, etc. ?



Fred



On Tuesday, September 19, 2006, at 10:07 AM, Roger Bull wrote:



 	  Quote: 	
		   Klaus,

  

 As a last resort, if all else fails, and no other avenue is available, 

 you could try Europa!

  

 Roger

astills(at)cox.net
Guest

Posted: Tue Sep 19, 2006 11:11 am Post subject: brake master cylinder, bungee cord

Thats what I  say...go Roger

 Al  Stills

 N625AZ

 [quote]   --

n100rh(at)sbcglobal.net
Guest

Posted: Tue Sep 19, 2006 12:32 pm Post subject: brake master cylinder, bungee cord

Roger,

It is so nice to see a Europa representative show up on the list  Hope 

all is well with you and your mates.



Ralph



Roger Bull wrote:

[quote] Klaus,

  

 As a last resort, if all else fails, and no other avenue is available, 

 you could try Europa!

  

 Roger



     --

UVTReith(at)aol.com
Guest

Posted: Tue Sep 19, 2006 1:17 pm Post subject: brake master cylinder, bungee cord

Klaus,

  

 please try Rüdiger Klink. He changed from Monowheel to Tri-Gear and should  have these parts still available for "kleines Geld".

 klinkhoerakustik(at)t-online.de (klinkhoerakustik(at)t-online.de)   or  klink(at)t-online.de (klink(at)t-online.de) 

 The same is with Joachim Hohenstein at Stade near Hamburg.

 He changed too.

 Another contact is Erich Gabbe, also flying in Stade. He knows all the  Classic Europa Pilots from that Hamburg/stade area very well and definately can  help you. eupa91(at)gmx.de (eupa91(at)gmx.de) 

 When you need further help, I will do.

  

 Best wishes from Germany,

 Bruno Reith/Europa Aircraft Germany

  [quote][b]

kheindl(at)msn.com
Guest

Posted: Tue Sep 19, 2006 4:09 pm Post subject: brake master cylinder, bungee cord

How is your Smart engine coming along ?



do not archive





 	  Quote: 	
		  From: UVTReith(at)aol.com

Reply-To: europa-list(at)matronics.com

To: europa-list(at)matronics.com

Subject: Re: brake master cylinder, bungee cord

Date: Tue, 19 Sep 2006 17:17:17 EDT



Klaus,



please try Rüdiger Klink. He changed from Monowheel to Tri-Gear and should

have these parts still available for "kleines Geld".

_klinkhoerakustik(at)t-online.de_ (mailto:klinkhoerakustik(at)t-online.de)    or

_klink(at)t-online.de_ (mailto:klink(at)t-online.de)

The same is with Joachim Hohenstein at Stade near Hamburg.

He changed too.

Another contact is Erich Gabbe, also flying in Stade. He knows all the

Classic Europa Pilots from that Hamburg/stade area very well and definately 

can

help you. _eupa91(at)gmx.de_ (mailto:eupa91(at)gmx.de)

When you need further help, I will do.



Best wishes from Germany,

Bruno Reith/Europa Aircraft Germany

hagargs(at)earthlink.net
Guest

Posted: Tue Sep 19, 2006 8:14 pm Post subject: brake master cylinder, bungee cord

You might try installing the Matco  Master cylinder hand brake assy that

goes on the control stick.  I have that installed on my plane with a few

mods.  It makes it real handy for ground handling and pushing the plane

around as you can reach in to the stick and brake.  Its handy as my plane

has to go up and down a small incline on the driveway and it is easy to

modulate the  speed to reach in to the stick.

Steve

Steve Hagar

hagargs(at)earthlink.net

[quote] [Original Message]

 From: Ralph Hallett <n100rh(at)sbcglobal.net>

 To: <europa-list(at)matronics.com>

 Date: 9/19/2006 1:40:31 PM

 Subject: Re: brake master cylinder, bungee cord

 Roger,

 It is so nice to see a Europa representative show up on the list  Hope 

 all is well with you and your mates.

 Ralph

 Roger Bull wrote:

 > Klaus,

 >  

 > As a last resort, if all else fails, and no other avenue is available, 

 > you could try Europa!

 >  

 > Roger

 >

 >     --

UVTReith(at)aol.com
Guest

Posted: Wed Sep 20, 2006 12:38 am Post subject: brake master cylinder, bungee cord

Answering Karl Heindl's question: How is your Smart engine coming  along.

  

 My Monowheel XS (D-EUVT) is now ready build and we made the wing test in  July.

 The result was very good and the inspector signed off that.

 I will get the baby now to Vlasim (Czech Republic) for painting, fine  trimming and engine hanging. Definately the plane will be ready for the coming  season.

 Europa XS Monowheel short wing with smart-Brabus 102 HP turbocharged engine  and at first with the new curved ground adjustabe Woodcomp 3-blade prop.

 As there is no direct adaption on the smart engine for the vacuum system -  I have to do a special bracket with bearings and belt drive, to use the free  belt pulley of the air-conditioning pump - I thing about to change the  Instruments from the standard sixpack to a Dynon D 100 display.

 Therefore for sale are brand new items like Rapco Vacuum pump,  suction regulator, filter assembly, suction gauge, attitude gyro and directional  gyro. 

 If there is somebody interested in, he can get the whole lot for 980,00  EUR.

 When the baby has made it's first fly, I will inform the forum about the  results.

  

 Bruno Reith 

  [quote][b]

hsiedsma(at)inter.nl.net
Guest

Posted: Wed Sep 20, 2006 4:52 am Post subject: brake master cylinder, bungee cord

Klaus



I have both items available. I have the bungee cord new and also the master

cylinder for the monowheel.

I changed to a Tri gear and will mount the springs instead of the bungee

cord in my plane.



Hans Siedsma



-----Oorspronkelijk bericht-----

Van: owner-europa-list-server(at)matronics.com

[mailto:owner-europa-list-server(at)matronics.com]Namens Steve Hagar

Verzonden: Thursday, September 21, 2006 6:20 AM

Aan: europa-list(at)matronics.com

Onderwerp: Re: brake master cylinder, bungee cord




You might try installing the Matco  Master cylinder hand brake assy that

goes on the control stick.  I have that installed on my plane with a few

mods.  It makes it real handy for ground handling and pushing the plane

around as you can reach in to the stick and brake.  Its handy as my plane

has to go up and down a small incline on the driveway and it is easy to

modulate the  speed to reach in to the stick.



Steve



Steve Hagar

hagargs(at)earthlink.net

[quote] [Original Message]

 From: Ralph Hallett <n100rh(at)sbcglobal.net>

 To: <europa-list(at)matronics.com>

 Date: 9/19/2006 1:40:31 PM

 Subject: Re: brake master cylinder, bungee cord



 



 Roger,

 It is so nice to see a Europa representative show up on the list  Hope

 all is well with you and your mates.



 Ralph



 Roger Bull wrote:

 > Klaus,

 >

 > As a last resort, if all else fails, and no other avenue is available,

 > you could try Europa!

 >

 > Roger

 >

 >     --

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum