 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
josok-e(at)ukolo.fi
Guest
|
 Posted: Tue Sep 26, 2006 10:36 am Post subject: the ultimate ventilator |
 |
|
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <!-- /* The original subSilver Theme for phpBB version 2+ Created by subBlue design http://www.subBlue.com NOTE: These CSS definitions are stored within the main page body so that you can use the phpBB2 theme administration centre. When you have finalised your style you could cut the final CSS code and place it in an external file, deleting this section to save bandwidth
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
jodel(at)nildram.co.uk
Guest
|
| Posted: Thu Sep 28, 2006 1:43 am Post subject: the ultimate ventilator |
|
|
Hi Jos,
I have fitted these to my Europa. I can confirm that the holes were not threaded on mine. As for the gap, mine were quite tight (less than 0.5mm) much the same as in pic 3 of 9 posted on EuropaOwners by Bob.
Mine are mounted lower down than Bob’s and are roughly where most people have the NACA vents. I mounted mine on the inside face of the outside skin (if that makes sense!) This produced a very nice flush finish on the outside.
Cheers
Simon
From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of josok
Sent: 26 September 2006 19:35
To: europa-list(at)matronics.com
Subject: the ultimate ventilator
Decided that these would be the ventilators for me. Although i have a deep rooted distrust to anything that is called perfect or ultimate 
But:
Although there are countersunk screws supplied with the unit, there is no thread in the holes. There remains also a small gap between the valve and the body of the unit. The ventilaters are unpainted, blanc aluminium. Do i have some rejects or is this normal for these ultimate articles?
Kind Regards,
Jos Okhuijsen
01234567890123
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
