Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Some more newbie questions - spray gun

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
LarryRosen



Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

PostPosted: Thu Dec 28, 2006 7:40 am    Post subject: Some more newbie questions - spray gun Reply with quote

Use an inexpensive HPLV detail gun for priming. A regular sized gun is
just to big and non HPLV gives too much overspray. Harbor freight has a
spray gun on sale for $40 and it does a fine job.
<http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=46719>.

Also here is a link to a guide on setting up the gun
<http://purplesagetradingpost.com/sumner/techinfo/HVLPspraygun.html>

The 2 gallon kit should be enough for the entire project. 2 year shelf
life.
No shelf life on the alumiprep, 1 gal will be more than enough.
Alodine does have a 1 year shelf life in liquid form.

Watch out for the hazmat shipping charges.

If you go the solid alodine route let me know if you want to split the
order.

Larry Rosen
#356

Bob Leffler wrote:
Quote:

For those that went the alumiprep, alodine, akzo prime (no primer war
discussion), what quantity of these should be initially ordered? Is the
shelf life long enough to order quantities for the entire aircraft?

Is there a better source for these other than Aircraft Spruce?

I understand that alodine can also be obtained in a powder form. Is it cost
effective for us in the quantities needed for the RV10? If so, where is a
good source to obtain the powder form?

What quantities and sizes of "oops" rivets should I order?

I'm also looking for recommendations on a spray gun to use for priming. I
don't have any experience with HVLP guns, so I am looking for what has
worked well for others.

Thanks,

Bob




- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group