Matronics Email Lists :: View topic - Small Connector for Ray Allen Trim Servo Cables?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Small Connector for Ray Allen Trim Servo Cables?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

rparigoris

Joined: 24 Nov 2009
Posts: 804

Posted: Tue Feb 04, 2014 11:09 am Post subject: Small Connector for Ray Allen Trim Servo Cables?

Hi Valin 

 	We were going to use D-sub connector with no shell, use Goop to hold wires to connector and heat shrink together (this was one of Bobs ideas, I am pretty sure he has instructions for this). 

 	Since we have an inspection cover close to the servo, insteads of using a connector we just stagger soldered wires and heat shrunk, leaving a service loop to allow us to unsolder if servo ever needed replacement or removal. 

 	In addition we marked on a white piece of heat shrink which wires you would want to connect to a 9 volt battery to jog to a somewhat neutral position to get you home in the event the pitch circuit failed. 

 	Details: 

 	http://www.europaowners.org/main.php?g2_itemId=30484 

 	Ron Parigoris    [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum