Matronics Email Lists :: View topic - Two into one or three into one solder splice

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Two into one or three into one solder splice

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Fri Mar 07, 2014 5:40 am Post subject: Two into one or three into one solder splice

At 11:21 PM 3/6/2014, you wrote:

 	  Quote: 	
		  



I've been searching for a good guide on the proper way to create a 

solder splice for two wires into a single wire.  I'm also interested 

how to splice three wires into a single wire.


	


   This problem has been managed with crimped splices

   for decades . . .



http://tinyurl.com/l67uj8h



   You can bring multiple wires into any of the

   PIDG (or equivalent) devices as long as the

   devices is sized for cross section of copper

   in the proposed joining . . .



   Soldering them together under a heat-shrink

   cover is equally functional . . .





   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum