rowedenny
Joined: 09 Mar 2008
Posts: 338
Location: Western PA
|
 Posted: Mon Jun 09, 2014 8:59 am Post subject: 2si 690L-70 soon to be fore sale |
 |
|
Kolbers,
Saturday during my preflight inspection I discovered the mag end cylinder head on my 690 had developed an outer o-ring coolant leak.
As my Rotax 670 is ready for testing and it's hard to get at the front cylinder with the engine on the plane, I decided to pull the 2si and come ahead with the Rotax swap.
The leak is not internal as it runs fine so it's just the outer o-ring that's bad and I will be replacing it and the inner o-ring as a matter of course.
Point being, as soon as the 670 is confirmed to be good to go, the 690L will be for sale.
Details: 70hp at 6250 rpm, inline triple, 28mm Mikuni VM carbs, idles smooth down to 1400rpm, 2.65 to 1 reduction, heavy duty coated exhaust, original lighter exhaust with minor cracking also comes with it, several sets of gearbox rubber dampers, spare water pump, and various spare parts I've accumulated over the years. Has less than 150 hrs "I'm at work and don't remember the exact number in the log book", is sewing machine smooth with a three blade prop. "Prop not included" Entire cooling system and mounting brackets included, as well as triple Mikuni fuel pump.
I have several good pics of the installation I can send to those interested as well as a recent vid of it idling happily at 1450rpm. Triple cable splitters and cables on the enricher's and throttles too.
Best offer over $1200.
724-882-6788
Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
