yellowbird1
Joined: 01 Nov 2012
Posts: 88
|
 Posted: Fri Jun 13, 2014 2:40 pm Post subject: Mark 3 X-tra Dual Controls |
 |
|
That looks like what I have.I’ll have to take some photos as well. But I’m going out of town so it won’t be until next week.
Brad
___________________________
“Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free.”
-- President Ronald Reagan
On Jun 12, 2014, at 20:52 , Colin Hudson <colin.scott.hudson(at)gmail.com (colin.scott.hudson(at)gmail.com)> wrote:
[quote]Brad I tried to send this to the list, but the pictures were too big. To answer your question about you having the right controls. I attached two pictures. The first is the way my controls arrived from Kolb after I purchased them. The 2nd is the way they look installed in my M3X-tra. If you look close you can see the adjustable linkage to put the sticks centered where they need to be. As I said eariler, I had to remove them. I just lost too much control with them. You will also notice all the extra linkage that puts more play in the controls. My center stick is longer, giving me more leverage and direct connection to the controls. Hope this helps.
Scott Hudson
A&P/ATP
N424AL
<unfinished.JPG><Dual Controls.jpg>[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Brad Nation,
Albuquerque, NM
MK3 Xtra |
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
