 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rvanduyn(at)stx.rr.com
Guest
|
 Posted: Tue Jul 04, 2006 2:53 pm Post subject: help locating hard points |
 |
|
I need some help: I am at the point of installing the front seat shoulder harnesses and realized that I cannot locate the hard points referenced on (page 49-02) of the RV-10 plans. The head liner is already installed and the cabin cover is primed covering up the location of the hard points. I sure would appreciate someone measuring the location. This could be accomplished measuring aft of the door and up from the window.
Thanks for your help. Bob
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
jim(at)CombsFive.Com
Guest
|
| Posted: Tue Jul 04, 2006 3:28 pm Post subject: help locating hard points |
|
|
The two hard points on my top are 11 1/8 inches behind the
rear edge of the door opening (Measured to the center of the circular area of the hard point).
The hard points are 2 feet apart (center to center).
Another measurement is 5 1/2" up from the rear window lip. although yours may be covered / painted over at this point.
A third measurement is to drop a straight edge back from the two door hinges (on the top). The center of the hard point is 5 1/2" down (perpendicular) from that line.
I don't know if this is going to help or not.
Jim Combs
N312F
40192
============================================================
I need some help: I am at the point of installing the front seat shoulder harnesses and realized that I cannot locate the hard points referenced on (page 49-02) of the RV-10 plans. The head liner is already installed and the cabin cover is primed covering up the location of the hard points. I sure would appreciate someone measuring the location. This could be accomplished measuring aft of the door and up from the window.
Thanks for your help. Bob
============================================================
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
