Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Flanging tools

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
mgraves(at)usmo.com
Guest
PostPosted: Thu Jul 06, 2006 7:03 am    Post subject: Flanging tools Reply with quote
For those that really don't want to make a set from wood or metal.

http://www.mittlerbros.com/

will make you a set from machined steel. These Mittlerbros is where
Zenith got their bench mounted punch and flare tools at the shop in Mexico
MO. ALL flanges from the factory both 601 and 701 are made with these dies.

Hit PUNCH AND FLARE TOOLS button at the bottom of the above page..

The 701 and the 601 use the same flange sizes...... 65, 95 & 115 mm
Zenith only has those three sizes on the bench.

Nick has approved the 2.5 inch flange from Mittlerbros at $40 instead of
the 65mm
And a 4.5 inch flange which Milltler will have on the shelf but not listed
on the web page instead of the 115mm.
and they will custom make a custom 95mm one.........

All three should be less than $200 total encluding shipping, but these
prices were a couple of years ago.

your mileage may vary

Monty

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group