s_thatcher(at)bellsouth.n Guest
|
Posted: Thu Jul 06, 2006 5:27 pm Post subject: Rear Longerons on Bottom Fuselage |
|
|
Hello Listers,
I got an answer from Zenith! With reference to the probem I was having with the rear longerons extending away from the bottom skin resulting in an edge distance of 6-7mm at the HT Frame, I was sent this email from Caleb Gebhardt at Zenith Aircraft.
"I've had a look at the pictures you sent and looked over your problem. You won't have a problem with it having an edge distance of 6mm. The absolute minimum edge distance is 1.5 x diameter of the hole, which for those rivets the minimum is 4.75mm."
Thanks to those of you who responded. This was one of those areas that I just worried about because of the loads. At least now I know the "Real" rule regarding edge distance. I'll stay with the 3X distance but at least I won't worry as much if I drop to 2-2.5X.
Now, on to the Bottom Access Panel...
Scott Thatcher
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|