brian

Joined: 02 Jan 2006 Posts: 643 Location: Sacramento, California, USA
|
Posted: Mon Jan 16, 2006 9:25 pm Post subject: Cheap CDI/ILS indicators (was: EFIS Comparisons) |
|
|
BobsV35B(at)aol.com wrote:
Quote: | The reference to "full" ILS was meant to include a glide slope. There is no
way that I am aware of to see the glide slope on the 430 control unit face.
Consequently a CDI is needed. While I am not very familiar with how the 430
works, I also believe you will need a resolver to input VOR radials for the
VHF navigation portion of the 430.
|
Most Nav radios that have built-in VOR/LOC converters output signals
intended to drive meter movements. There is even an ARINC standard for
these types of signal. (I forget the ARINC number for these analog meter
movement signals.)
There are a lot of older ILS display heads that have the deviation
indicators (CDI/VDI), the flags, and an OBS resolver. I have been able
to pick these up for next to nothing. (I got one free for the asking at
an old shop once.) This type of display may be used with your GPS or nav
with a built-in VOR/LOC converter. No need to buy a brand-new expensive
unit.
--
Brian Lloyd 2243 Cattle Dr.
brian-yak at lloyd dot com Folsom, CA 95630
+1.916.367.2131 (voice) +1.270.912.0788 (fax)
I fly because it releases my mind from the tyranny of petty things . . .
- Antoine de Saint-Exupery
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________ Brian Lloyd
brian-yak at lloyd dot com
+1.916.367.2131 (voice) +1.270.912.0788 (fax)
I fly because it releases my mind from the tyranny of petty things . . .
- Antoine de Saint-Exupery |
|