FLYaDIVE(at)aol.com Guest
|
Posted: Mon Jul 24, 2006 8:01 am Post subject: Illuminated DPST Toggle Switch- Whoops |
|
|
-> AeroElectric-List message posted by: FLYaDIVE(at)aol.com
In a message dated 7/22/06 9:01:25 PM Eastern Daylight Time,
scc_ron(at)yahoo.com writes:
Quote: | Anybody know where I can find ON/NONE/OFF switches with independent
lighting?
|
Quote: | I bought several from B and C (and they were special order) that don't
seperate the 12 volt light on the toggle from the on/off circuits I wish to
activate. If I were to put a hot wire to the radio equipment, it would fry
the unit I wish to activate. All I want to do is get a lighted toggle that
tells me the other circuit in the switch is closed (ON) without also giving
that circuit any charge. Thanks in advance.
Ron
N8ZD - flying in two weeks!
==========================
|
Ron:
An ON/NONE/OFF is the same thing as an ON/OFF (SPST).
Ron:
I used the term SPST ... It should have been DPST.
The procedure and everything else is still the same.
Why do you need a DPST?
I am guessing ... Current handling capabilities?
If not, then you can tie two or more devices to the same switch (SPST).
Barry
"Chop'd Liver"
"Show them the first time, correct them the second time, kick them the third
time."
Yamashiada
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|