Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Flap Control Bearing

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
eddies



Joined: 20 Jun 2006
Posts: 40
Location: Australia
PostPosted: Wed Aug 23, 2006 11:06 pm    Post subject: Flap Control Bearing Reply with quote
Hi Listers,

I have just drilled/filed the 1 inch holes in the flap control bearings 6B19-5. Based on the drawings, I marked and drilled the 1 inch holes in the centre of the bearing on the face that measures 50mm x 55mm.

When I positioned the bearing on the flap torque tube, the angle of the torque tube from the fuselage side to the bearing is not square to the rear of 6B5-2 (rear wing spar channel), this also means that I cannot connect the torque tubes together, are these holes meant to be drilled closer to the base of the bearing ?

The holes in the side skin of the fuselage where marked using a piece of spare hinge with the wing jig installed, so I am pretty sure that I have the position of the holes in the fuselage sides for the torque tube is correct.

Any help or suggestions would be much appreciated.

Best Regards,
Eddie Seve

http://www.mykitlog.com/eddieseve

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group