Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Scratch built Spars

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

ter_turn(at)yahoo.com
Guest

Posted: Thu Sep 07, 2006 7:48 pm Post subject: Scratch built Spars

A while back someone asked for a picture of a Spar being scratch built. Here's on my Grandson is working on:)

   

  Terry Turnquist

  601 XL Plans

  St. Peters, MO

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

100_0084.jpg

Description:

Filesize:

588.81 KB

Viewed:

253 Time(s)

TxDave

Joined: 22 Jul 2006
Posts: 168
Location: Temple, TX

Posted: Fri Sep 08, 2006 6:51 am Post subject: Re: Scratch built Spars

Hey Terry,



I was the guy making the inquiry about scratch building spars. Thanks for sharing the photo. I'm to the point of deburring all those many, many holes. Any advice you have to offer would be appreciated.



Dave Clay

Temple, Texas

Ch601XL Scratch Builder



http://www.daves601xl.com

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

VideoFlyer(at)aol.com
Guest

Posted: Fri Sep 08, 2006 8:32 am Post subject: Scratch built Spars

In a message dated 9/8/06 dclaytx2(at)HOTMAIL.COM writes:

 

  	  Quote: 	
		  I'm to the point of deburring all those many, many holes. Any advice you have to offer would be appreciated 	


 

 

 Start deburring!

  [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

hrs1(at)frontiernet.net
Guest

Posted: Fri Sep 08, 2006 9:18 am Post subject: Scratch built Spars

Check the archives regarding a special type of file - the name might be 

a Vixen (somebody have the exact name?).  It has curved ridges and 

lightly rubbed against the line of rivet holes, takes a lot of the rough 

stuff off. Then deburr in the normal manner with a drill point, etc. 

Robert Schoenberger 701

VideoFlyer(at)aol.com wrote:

 	  Quote: 	
		   In a message dated 9/8/06 dclaytx2(at)HOTMAIL.COM writes:

> I'm to the point of deburring all those many, many holes. Any advice 

> you have to offer would be appreciated

 Start deburring!

 *

 *

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

grs-pms(at)comcast.net
Guest

Posted: Fri Sep 08, 2006 12:17 pm Post subject: Scratch built Spars

Yes, it's a vixen.  (This is a reference to a type of file, not to a foxy

stripper from NAPA.)  If you can't find a vixen file, try a laminate file.

They are made for use on Formica-type laminates, but they do a good job on

aluminum.



George



Do not archive

---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

mgraves(at)usmo.com
Guest

Posted: Sat Sep 09, 2006 3:07 am Post subject: Scratch built Spars

use a short vixen file or a dog leg de burr tool..  I prefer the 

latter,   to each his own.



http://www.yardstore.com/index.cfm?action=ViewDetails&ItemID=118&Category 5



Its item number14031 if the link doesn't work



http://www.yardstore.com



Monty



At 07:51 AM 9/8/2006 -0700, you wrote:

 	  Quote: 	
		  



Hey Terry,



I was the guy making the inquiry about scratch building spars. Thanks for 

sharing the photo. I'm to the point of deburring all those many, many 

holes. Any advice you have to offer would be appreciated.



Dave Clay

Temple, Texas

Ch601XL Scratch Builder



http://www.daves601xl.com





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=60357#60357

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum