Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Strobe Wires

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

barcusc(at)comcast.net
Guest

Posted: Sat Sep 09, 2006 6:41 am Post subject: Strobe Wires

I used about two inches of shrink tubing every few  inches and I also use liquid tape on the grommets to keep the wires from  sliding. The wires are not drawn completely tight to allow for a little flex and  it makes a nice bundle, I tried pulling the wires back and forth and it did  not move. Originally I grounded my wires to the frame of the wing, when I tested  the lights they did not work very well so I ran a ground wire, it works great  now.

  

  

 Clyde Barcus

601 XL, Corvair Powered

Wings,  Tail & Engine Complete

Working on Fuselage

   [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum