Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Switch contact rattings which is best for this app

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
brian-av(at)lloyd.com
Guest





PostPosted: Sun Sep 10, 2006 10:10 am    Post subject: Switch contact rattings which is best for this app Reply with quote

On Sun, 2006-09-10 at 04:56, FLYaDIVE(at)aol.com wrote:
Quote:
Silver is the better conductor - But - Oxidized much more.
Gold is obviously slightly less in conductivity (but, you will never know
that) than Silver - But - for the practical, does not oxidize.

Switches maintain their low on resistance by both mechanical wiping and
by the very tiny arc that occurs on make and break. If you do not pass
any current through a switch, often the mechanical wiping is
insufficient to ensure a low on-resistance. Gold, unlike silver, has the
characteristic that it maintains its low on-resistance regardless of the
current flowing through it. That is why it is used to switch signals
with no appreciable current (like audio signals).

Quote:
Without getting ridiculous in explaining a switch ... If you Double the
Voltage you Half the current. So a Switch that is rated at 0.4 Amps (at) 28 VDC will
be able to handle 0.8Amps (at) 14 VDC.

This is 100% false and incorrect. A switch rated at 0.4A is rated at
0.4A regardless of the voltage. The voltage ratings have to do with
reliably breaking the circuit. This also depends on whether you are
breaking a circuit carrying AC or DC. The amp rating also depends on
whether you are switching a resistive load or a lamp load. The low
resistance of a lamp filament causes a high inrush current so you need a
switch that is designed to carry more current so it isn't damaged by the
inrush current.

Barry, I strongly recommend you go back and reread the Aeroelectric
Connection. Bob does an excellent job of covering these things in there.
In a forum such as this, you really need to be sure of your answer
before you post one.

Brian Lloyd


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group