wjrhamilton(at)optusnet.c Guest
 
 
 
 
 
  | 
		
			
				 Posted: Thu Jan 05, 2006 8:12 pm    Post subject: Rudder Pulley Brackets | 
				     | 
			 
			
				
  | 
			 
			
				
 John,
 Thanks for that, your reply is reassuring, I will just keep the
 inspections going.
 Cheers,
 Bill Hamilton.
 At 13:47 4/01/2006, you wrote:
 My 500B has 18,000 hours on it. My rudder pulley brackets are cracked.
 Morris includes an inspection of them on his 100hr. inspection sheet. He
 informed me that when they manufactured the brackets, they folded them but
 didn't stress relieve the corners. He's seen multitudes of cracked ones, and
 he says even the ones that haven't been stop drilled only crack to a certain
 point. He says it's a problem he's been aware of only for the last 20 years
 or so.
 He is of the opinion that they probably cracked about 10 minutes after the
 airframe was built (ok, maybe a little longer than that). He's also
 mentioned that he's never *ever* seen or heard of one failing.
 I guess I'll just continue to keep an eye on my pulleys, and see if anything
 changes....
 /John
  | 	  
 CONFIDENTIALITY & PRIVILEGE NOTICE
 W.J.R.Hamilton,Glenalmond Group Companies,Fighter Flights Internet
 Services and Warbirds.Net. & <wjrhamilton(at)optusnet.com.au>.
 This message is intended for and should only be used by the
 addressee. It is confidential and may contain legally privileged
 information.If you are not the intended recipient any use
 distribution,disclosure or copying of this message is strictly
 prohibited.Confidentiality and legal privilege attached to this
 communication are not waived or lost by reason of the mistaken
 delivery to you.If you have received this message in error, please
 notify us immediately to Australia 61 (0)408 876 526
 Dolores capitis non fero. Eos do.
 
  |  | - The Matronics Commander-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Commander-List |  
  |  
 
 
 
 
  |