Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Switched power

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Dennis Jones

Joined: 17 Sep 2006
Posts: 45
Location: Poplar Grove, IL

Posted: Wed Sep 20, 2006 7:53 am Post subject: Switched power

For the encoder I plan on using a seperate fuse to the POWER IN pin (8)supplied from the a/c power to reduce warm up time and then use pin (14) SWITCHED POWER IN as indicated by the schematic for the switched power back to the transponder. Now for the question. The transponder schematic shows two pins together (8,20) used for SWITCHED POWER OUT. Do both of these get wired to the switched pin number 14 or because I'm powering the encoder pin 8 with its own power is one of these pins left empty?

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum