Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Knurled nut driver

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

gjs55(at)yahoo.com
Guest

Posted: Thu Oct 05, 2006 2:56 pm Post subject: Knurled nut driver

 	  Quote: 	
		  --> AeroElectric-List message posted by: "Jim Baker" <jlbaker(at)msbit.net ([email]jlbaker(at)msbit.net?subject=Re:%20Knurl%20driver....&replyto=5.1.0.14.2.20061005095714.01753588(at)pop.central.cox.net[/email])>



Does anyone have a source for a knurled nut (ring) driver as

were used on older switches/breakers? Tessco (?) used to have

one..these things are rare.


	


Hey Rev - is this what you're looking for?

   

  http://www.stewmac.com/shop/Electronics,_pickups/Tools:_Toggle_switch_wrench.html

   

  Jim Sinke

  N93634

  KLZU



  [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Jim Baker

Joined: 30 Mar 2006
Posts: 181
Location: Sayre, PA

Posted: Thu Oct 05, 2006 5:22 pm Post subject: Knurled nut driver

 	  Quote: 	
		   >Does anyone have a source for a knurled nut (ring) driver as

 >were used on older switches/breakers? Tessco (?) used to have

 >one..these things are rare.

 

 Hey Rev - is this what you're looking for? 

 

 http://www.stewmac.com/shop/Electronics,_pickups/Tools:_Toggle_switch_wrench.html 


	


I'd seen this one listed and thought it might be a candidate. 

Thanks for the heads-up. The one I'd seen before looked like a 

split, tapered tube with a threaded ferrule to squeeze the tube 

around the nut. I may end up having to get busy on the lathe and 

make one. I'd have to figure out how to knurl the ID of the end, 

tho....hmmmmm. Take apart a steel knurling tool wheel and use 

a hyd. press? Maybe.



Thanks, all.

Jim Baker

580.788.2779

Elmore City, OK

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum