Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

: Hugo Rv10#40456

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

gommone7(at)bellsouth.net
Guest

Posted: Thu Oct 05, 2006 4:38 pm Post subject: : Hugo Rv10#40456

Hi,reading about the floor panels,10 minutes ago just finished the final riveting,I also have a QB ,I remove the gear bracket,in order to remove the pans,are only few rivets,I epoxy primer everithing and install sound proffing underneat the pans,not in the bottom,now this is what I found,

even if was riveted and primer the line of rivets along the tunnel at the fire wall and aft,where not match #30,I found this after many rivets set at the floor,some body in the phillipines wake up for my thinking,

any way before install the copilot side I correct this ,and come smooth,refer to Van's (scott risan) will refer to the Phillys crew ,may be I help  some one in the QB # 650 or so.

By the way if somebody remove the landing gear bracket I suggest order a new set of bolts,they are install with stress,I will not reinstall the same ones,probably 15 0 20 doll worth in bolts.

Hugo

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum