 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jdalton77(at)comcast.net
Guest
|
 Posted: Sun Oct 15, 2006 11:32 am Post subject: E-Drill Bushing location |
 |
|
I'm assembling the elevator/HS and I can't seem to find anything in the parts that resembles the "E-Drill Bushing" for drilling the elevator horns. It's describes as a steel 1/4" diameter 1" long tube.
Did anyone else have trouble finding this?
Jeff
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
fehdxl(at)gmail.com
Guest
|
| Posted: Sun Oct 15, 2006 1:08 pm Post subject: E-Drill Bushing location |
|
|
Jeff,
Mine is in bag # 1001 along with the two WD-415, Trim Cable Anchors.
Which reminds me....I need to get the new WD-415-1's from Van's for $8...or the milled ones from, uh, can't remember the web site's name now, for $38 -- decisions?
Hope that helps.
-Jim
On 10/15/06, jdalton77(at)comcast.net (jdalton77(at)comcast.net) <jdalton77(at)comcast.net (jdalton77(at)comcast.net)> wrote: [quote] I'm assembling the elevator/HS and I can't seem to find anything in the parts that resembles the "E-Drill Bushing" for drilling the elevator horns. It's describes as a steel 1/4" diameter 1" long tube.
Did anyone else have trouble finding this?
Jeff
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jdalton77(at)comcast.net
Guest
|
| Posted: Sun Oct 15, 2006 5:54 pm Post subject: E-Drill Bushing location |
|
|
I have the ones from Dave at Rivethead-Aero.com.
I bought them before Vans came out with the new ones - Dave's are way better than the new ones though - and he has several other small parts that are better (and prefabricated by the way.) Buying the lot of them saves me a couple of hours.
[quote] ---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jdalton77(at)comcast.net
Guest
|
| Posted: Sun Oct 15, 2006 5:54 pm Post subject: E-Drill Bushing location |
|
|
Well, I never found it, but I had a piece of 1/4" OD copper pipe that, after sanding the exterior on the belt sander for a second did the job quite well.
[quote] ---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Todd.Stovall(at)pentagon.
Guest
|
| Posted: Mon Oct 16, 2006 2:52 am Post subject: E-Drill Bushing location |
|
|
Jeff,
Look in bag 1001. That's where it is according to the inventory sheet. I can't verifiy at the moment 'cause I'm at work.
Todd
[quote] --
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Jack.Phillips(at)cardinal
Guest
|
| Posted: Mon Oct 16, 2006 4:42 am Post subject: E-Drill Bushing location |
|
|
In the “For what it’s worth” category, I happened to visit the Van’s factory last Monday (and got a quick flight in N410RV), and bought the new WD-415-1’s while I was there. They look much better than the originals that came with my kit, with a better weld along the back (where the original had its only weld) and a really beefy weld along the front side.
Jack Phillips
# 40610
Raleigh, NC
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
