Matronics Email Lists :: View topic - Powering fuel injectors

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Powering fuel injectors

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

bbradburry(at)allvantage.
Guest

Posted: Thu Oct 19, 2006 7:46 am Post subject: Powering fuel injectors

I am using Z-19 as a guide for wiring my plane.  The primary and

secondary fuel injectors are not powered through the ECU, just

controlled by it.  I would like to power the injectors from the battery

buss.

Looking at Z-19, do I need to install a complete switch and diode system

for the injectors like is done for the fuel pump and ECU, or can I tie

on to the fuel pump OR the ECU system after either the switch (add a

separate diode) or after one of the diodes?  There will be two DPDT

switches to disable the primary and secondary injectors after this

connection.

My panel is becoming somewhat switch festooned and I would like to keep

more switches to a minimum.



Thanks,

Bill B

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum