aksnarek(at)gmail.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Thu May 05, 2016 12:39 am    Post subject: TeamGrumman-List Digest: 3 Msgs - 05/04/16 | 
				     | 
			 
			
				
  | 
			 
			
				I use aviation dual seal door seal. Works a treat and seals out noise.
 
 Sent from my iPhone
 
  	  | Quote: | 	 		   On 5 May 2016, at 17:03, TeamGrumman-List Digest Server <teamgrumman-list(at)matronics.com> wrote:
  
  *
  
  ==================================================
    Online Versions of Today's List Digest Archive
  ==================================================
  
  Today's complete TeamGrumman-List Digest can also be found in either of the 
  two Web Links listed below.  The .html file includes the Digest formatted 
  in HTML for viewing with a web browser and features Hyperlinked Indexes 
  and Message Navigation.  The .txt file includes the plain ASCII version 
  of the TeamGrumman-List Digest and can be viewed with a generic text editor 
  such as Notepad or with a web browser. 
  
  HTML Version:
  
     http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 16-05-04&Archive=TeamGrumman
  
  Text Version:
  
     http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 16-05-04&Archive=TeamGrumman
  
  
  ================================================
    EMail Version of Today's List Digest Archive
  ================================================
  
  
            ----------------------------------------------------------
                            TeamGrumman-List Digest Archive
                                       ---
                      Total Messages Posted Wed 05/04/16: 3
            ----------------------------------------------------------
  
  
  Today's Message Index:
  ----------------------
  
      1. 08:26 AM - Re: Canopy seals  (Dennis Cheever)
      2. 09:07 AM - Re: Canopy seals  (Discover)
      3. 09:36 AM - Re: Re: Canopy seals  (FLYaDIVE)
  
  
  
  ________________________________  Message 1  _____________________________________
  
  
  Time: 08:26:07 AM PST US
  From: "Dennis Cheever" <dcheever(at)bak.rr.com>
  Subject: Re: Canopy seals
  
  
  That makes sense and is what Ken demonstrated at his wrench bending weekend
  in Phoenix.  So just get a roll of white felt and apply it at the back edge
  of the canopy. Do you have reccomendations based on experience for width and
  thickness for the best seal?
  
  
  ________________________________  Message 2  _____________________________________
  
  
  Time: 09:07:04 AM PST US
  Subject: Re: Canopy seals
  From: "Discover" <923te(at)att.net>
  
  
  http://www.campbells.org/Airplanes/airplane_canopyseals.html
  
  http://www.mcmaster.com/#felt/=y51onl
  
  Try 2" wide by 1/4" adhesive backed
  
  
  Read this topic online here:
  
  http://forums.matronics.com/viewtopic.php?p=455870#455870
  
  
  ________________________________  Message 3  _____________________________________
  
  
  Time: 09:36:44 AM PST US
  Subject: Re: Re: Canopy seals
  From: FLYaDIVE <flyadive(at)gmail.com>
  
  Thanks for the info Discover:
  
  I have always used Wool Weather Stripping from the Aviation Aisle at Lowes.
  It does not have the self-stick backing so you then have to move down to
  the Aviation Floor Covering Aisle and pick up Double Sided Carpet Tape.
  Get the one that has the fiber reinforcement, it is stronger and easier to
  work with. The job can be done without removing the canopy.  And the carpet
  tape allows for total coverage of the area.  The NON-Sticky Backed wool
  weather striping is much more flexible for side-to-side adjustments when
  placing it down.  I mention this because the canopy has compound curves
  that must be matched for a flat lay-up. This is what I have found to be the
  Least Expensive and Easiest to do.
  
  McMaster Carr is a great company for the hard to find items, but they
  CHARGE for their convenience.
  
  
  Barry
  "Chop'd Liver"
  
 > On Wed, May 4, 2016 at 12:06 PM, Discover <923te(at)att.net> wrote:
 > 
 > 
 > http://www.campbells.org/Airplanes/airplane_canopyseals.html
 > 
 > http://www.mcmaster.com/#felt/=y51onl
 > 
 > Try 2" wide by 1/4" adhesive backed
 > 
 > 
 > Read this topic online here:
 > 
 > http://forums.matronics.com/viewtopic.php?p=455870#455870
  
  
  
  
  
  
  
  
 
 | 	 
 
 
  |  | - The Matronics TeamGrumman-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?TeamGrumman-List |  
  |  
 
 
 
 
  | 
			 
		  |