Matronics Email Lists :: View topic - dielectric grease vs conductive grease: when and where

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

dielectric grease vs conductive grease: when and where

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Jul 06, 2016 9:39 am Post subject: dielectric grease vs conductive grease: when and where

At 11:20 AM 7/6/2016, you wrote:

  	  Quote: 	
		  When and where should electrical connections receive grease? What type of grease should be used? --Thanks. 	


   If the connections are subject to water drip/splash.



   Dow Corning DC4 is my favorite.



  http://tinyurl.com/hbty5z2



  http://tinyurl.com/heqjw25



   it's a silicone based grease that doesn't

   attack rubbers and plastics. There are,

   no doubt, others.



   We also used DC4 to 'pot' coax connectors

   on towers before wrapping with Scotch 33

   tape.



 

 

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum