Matronics Email Lists :: View topic - MX-20 connected to 400W/500W

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

MX-20 connected to 400W/500W

Matronics Email Lists Forum Index -> Avionics-List

View previous topic :: View next topic

Author Message

recapen(at)earthlink.net
Guest

Posted: Tue Jul 05, 2016 9:24 am Post subject: MX-20 connected to 400W/500W

Any of you out there using the MX-20 connected to either a 400W or 500W series GPS?



I have a 420W connected to a MX-20.  Recently upgraded the software in the 420W and now the MX-20 screen map area is blank with the red X in the middle unless I have a flight plan active.  I have verified my wiring and settings - along with the system showing my position with the flight plan active so i am confident in the wiring / settings.



The 420W is running 5.3/5.0 software and the MX-20 has been tested up to version 5.7.  My understanding is that a newer version of software is available for the MX-20 and I am making inquiries as to upgrading.  My question to other users is - Does it work with the later software - or did Garmin abandon this device already!?



Thanks,

Ralph Capen

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Avionics-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum