Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Dynon Servo Wiring

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

MJKTuck(at)cs.com
Guest

Posted: Sun May 06, 2018 2:17 pm Post subject: Dynon Servo Wiring

A question for Dynon avionic Europa builders,



The servo wiring diagram for the Dynon servos seems to indicate that 

each power and ground wires from the servos should run and be connected 

separately to the power source. As these servos are relatively close 

together in my installation, can I not have them connected to single 

power and ground wires, so I just have two wires running through the 

fuselage to the panel rather than four? Maybe a single 20 AWG wire won't 

be big enough to run power to both servos?



Similarly, the yellow disconnect wires are shown being connected to a 

momentary switch but can I not just connect the two yellow wires 

together at the servo end and have a single yellow wire running up to 

the switch? As far as I can tell this is just a trigger to ground 

through the switch so there is no real 'current' flowing through it as such.



Thanks,



Martin Tuck

Europa N152MT

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

erichdtrombley(at)juno.co
Guest

Posted: Mon May 07, 2018 7:15 am Post subject: Dynon Servo Wiring

Hi Martin,



I too have both of my servos near each other. I ran only one wire bundle per the manual, as if you were installing only one servo.  However, at the servo end I made a daisy chain so that I could extend the wire harness to the other servo.  Then you only need one yellow disconnect wire run to a single switch on your panel or stick.  Hope that makes sense. 



Erich,

N28ET ClassicMono 914

____________________________________________________________

Unbelievable German World War 2 Photo Shocks Americans

pro.naturalhealthresponse.com

http://thirdpartyoffers.juno.com/TGL3131/5af06cfa753ba6cf86b78st01duc

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum