Paul Hawkins
 
 
  Joined: 05 Jun 2011 Posts: 9 Location: BIGGIN HILL UK
  | 
		
			
				 Posted: Fri Nov 08, 2024 7:26 am    Post subject: PV-50 Prop settings | 
				     | 
			 
			
				
  | 
			 
			
				Hi 
   Many thanks for your responses and recommendations for a replacement prop much appreciated and a special thanks to Bob, when he posts it always reminds me every day is a school day.
   cheers Paul
   
  
  
   
  
   From: Paul Hawkins
  Sent: 24 March 2022 15:00
  To: europa-list(at)matronics.com <europa-list(at)matronics.com>
  Subject: PV-50 Prop settings  
  
       
   
   
 Hi 
   
 Some advice please on prop settings, my Europa has a 914 engine with an Arplast PV-50 prop in fine pitch it’s set to give just under 5400 rpm static and on take-off works as it should the problem is when  I set to cruise I aim for 130 Kts but I have to keep coming back on the throttle not to go above that speed I end up with 130 Kts with an rpm of 4200 the problem started after a prop service, normally I tend to cruise at 125/130 for 4650/4700 rpm-ish, there’s  10° difference between fine and coarse pitch, which way should I adjust + or – the 10° prop difference? 
   
 Cheers Paul
 
  |  | - The Matronics Europa-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Europa-List |  
  |  
 
 
 
 
  | 
			 
		  |