 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
owl40188(at)yahoo.com
Guest
|
 Posted: Mon Oct 30, 2006 7:05 am Post subject: Hole for break fitting in landing gear mount |
 |
|
I tried to install the 45 degree break fitting thats on the lower skin/ landing gear mount this morning. Thats the one which needs a 5/8 inch hole in the skin. It appears that the hole in the landing gear mount is too small for the fitting. There is no mention in the manual about having to enlarge the landing gear fitting hole.
Has anyone else had this problem?
Thanks
Niko Napoli
40188
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
Rick S.
Joined: 12 Feb 2006
Posts: 347
Location: Las Vegas
|
| Posted: Mon Oct 30, 2006 7:31 am Post subject: Hole for break fitting in landing gear mount |
|
|
Niko,
It's due to the powder coating, I used a Dremel tool to remove the coating and it fit perfectly. I quick shot of gray primer to stop it from rusting should preceed installing the fitting.
Rick S.
40185
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Rick S.
RV-10
40185 |
|
| Back to top |
|
|
cnm(at)willitsonline.com
Guest
|
| Posted: Mon Oct 30, 2006 7:45 am Post subject: Hole for break fitting in landing gear mount |
|
|
just get the unibit on it
mine was the same
[quote] ---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
owl40188(at)yahoo.com
Guest
|
| Posted: Mon Oct 30, 2006 8:46 am Post subject: Hole for break fitting in landing gear mount |
|
|
Thanks for the info.
Do not archive
Niko
40188
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
