Matronics Email Lists :: View topic - battery cable routing

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

battery cable routing

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckollsr(at)cox.net
Guest

Posted: Thu Nov 02, 2006 6:16 am Post subject: battery cable routing

 	  Quote: 	
		  Comments/Questions: I have a Glastar which is both a composite fuselage 

design with a steel cage.  The Batteries are located in the rear and #2 

cables run forward to firewall.  You mention that we need to run cables 

together. I'd like to run them together but split them so the (-) cable 

goes to left side of firewall and the (+) cable goes to the B&C ground 

block on the right.  Im going with all electic plane per you design.  Is 

this a problem or should I run them to the same side of the 

firewall?  Thank You, Scott


	


   Run them together as far as practical. Then splitting at

   the firewall is fine.



   Bob . . .

            -----------------------------------------

            ( Experience and common sense cannot be )

            ( replaced with policy and procedures.  )

            (                  R. L. Nuckolls III   )

            -----------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum