Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

flap bushing install

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

pcasson(at)sasktel.net
Guest

Posted: Wed Nov 08, 2006 6:45 am Post subject: flap bushing install

Hi All,  

   

I’m building slow build and due to Canadian inspection rules we have to deviate from the construction sequence in the manual a fair bit.  Somewhere along the way I’ve missed the instructions on installing the bushings into the 1025A flap brackets.  We looked through the book for 20 min. last night and did not find it.  Could someone please tell me what page it’s on.  

   

Thanks,  

   

Perry Casson  

Regina, Canada  

       [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

n8vim(at)arrl.net
Guest

Posted: Wed Nov 08, 2006 6:58 am Post subject: flap bushing install

Page 22-8

 

 Pic attached.

 

 -Jim 40384

 

 

 Perry Casson wrote:

  	  Quote: 	
		                 st1\:*{behavior:url(#default#ieooui) }  <![endif]-->             

Hi All,   

    

I’m building slow build and due to Canadian inspection rules we have to deviate from the construction sequence in the manual a fair bit.  Somewhere along the way I’ve missed the instructions on installing the bushings into the 1025A flap brackets.  We looked through the book for 20 min. last night and did not find it.  Could someone please tell me what page it’s on.   

    

Thanks,   

    

Perry Casson   

Regina, Canada   

    	  Quote:

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

bushing.jpg

Description:

Filesize:

38.84 KB

Viewed:

148 Time(s)

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Wed Nov 08, 2006 7:01 am Post subject: flap bushing install

Sec 22-8 step 13 figure # 4



Deems Davis # 406

Finishing - ( A Misnomer ! )

http://deemsrv10.com/



Perry Casson wrote:



 	  Quote: 	
		   Hi All,



 I’m building slow build and due to Canadian inspection rules we have 

 to deviate from the construction sequence in the manual a fair bit. 

 Somewhere along the way I’ve missed the instructions on installing the 

 bushings into the 1025A flap brackets. We looked through the book for 

 20 min. last night and did not find it. Could someone please tell me 

 what page it’s on.



 Thanks,



 Perry Casson



 Regina, Canada



*

*

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rene(at)felker.com
Guest

Posted: Wed Nov 08, 2006 7:07 am Post subject: flap bushing install

I can not remember where the instructions were, but make sure you have your bottom skins on first before to press them in.  Sorry, I do not have my plans here to find the reference.  

     

Rene' Felker  

        

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Perry Casson

 Sent: Wednesday, November 08, 2006 7:45 AM

 To: rv10-list(at)matronics.com

 Subject: flap bushing install  

  

   

Hi All,  

   

I’m building slow build and due to Canadian inspection rules we have to deviate from the construction sequence in the manual a fair bit.  Somewhere along the way I’ve missed the instructions on installing the bushings into the 1025A flap brackets.  We looked through the book for 20 min. last night and did not find it.  Could someone please tell me what page it’s on.  

   

Thanks,  

   

Perry Casson  

Regina, Canada   	  Quote: 	
		    www.aeroelectric.com 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1 	  Quote: 	
		  	
2 	  Quote: 	
		  	
3 	  Quote: 	
		  	
4 	  Quote: 	
		  	
5

        [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

LloydDR(at)wernerco.com
Guest

Posted: Wed Nov 08, 2006 7:28 am Post subject: flap bushing install

It is on page 22-8, Figure 4, bottom

 Hope this helps

 Dan

 40269 (N289DT)



   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Perry  Casson

Sent: Wednesday, November 08, 2006 9:45 AM

To:  rv10-list(at)matronics.com

Subject: flap bushing  install

 

  

Hi All, 

  

I’m building slow build and due to  Canadian inspection rules we have to deviate from the construction sequence in  the manual a fair bit.  Somewhere along the way I’ve missed the  instructions on installing the bushings into the 1025A flap brackets.  We  looked through the book for 20 min. last night and did not find it.  Could  someone please tell me what page it’s on. 

  

Thanks, 

  

Perry  Casson 

Regina,  Canada

[quote]



href="http://www.aeroelectric.com">www.aeroelectric.com

href="http://www.buildersbooks.com">www.buildersbooks.com

href="http://www.kitlog.com">www.kitlog.com

href="http://www.homebuilthelp.com">www.homebuilthelp.com

href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List



[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

armywrights(at)adelphia.n
Guest

Posted: Wed Nov 08, 2006 3:17 pm Post subject: flap bushing install

Having bottom skins on is not mandatory, just in case you’re trying to now push them back out.  You just have to gently spread the slot around the bushing as you attach the bottom skins.  

   

Rob Wright  

#392  

Many safe iterations of bottom skin installs around the bushings…  

         

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Rene Felker

 Sent: Wednesday, November 08, 2006 9:07 AM

 To: rv10-list(at)matronics.com

 Subject: RE: flap bushing install  

  

   

I can not remember where the instructions were, but make sure you have your bottom skins on first before to press them in.  Sorry, I do not have my plans here to find the reference.  

     

Rene' Felker  

        

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Perry Casson

 Sent: Wednesday, November 08, 2006 7:45 AM

 To: rv10-list(at)matronics.com

 Subject: flap bushing install  

  

   

Hi All,  

   

I’m building slow build and due to Canadian inspection rules we have to deviate from the construction sequence in the manual a fair bit.  Somewhere along the way I’ve missed the instructions on installing the bushings into the 1025A flap brackets.  We looked through the book for 20 min. last night and did not find it.  Could someone please tell me what page it’s on.  

   

Thanks,  

   

Perry Casson  

Regina, Canada   	  Quote: 	
		    www.aeroelectric.com 	
 	  Quote: 	
		  www.buildersbooks.comwww.kitlog.com 	
 	  Quote: 	
		  www.homebuilthelp.com 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1 	  Quote: 	
		  	
2 	  Quote: 	
		  	
3 	  Quote: 	
		  	
4 	  Quote: 	
		  	
5 	  Quote: 	
		  	
6 	  Quote: 	
		  	
7 	  Quote: 	
		  	
8 	  Quote: 	
		  	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1

       [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

pcasson(at)sasktel.net
Guest

Posted: Wed Nov 08, 2006 8:32 pm Post subject: flap bushing install

Thanks for your help guys – My page 22-8 was rev 0 which does not have any mention of installing bushing or have a figure 4.  Talked to Vans and saw  the updated page James Hein sent and even found bushings.  All is good.  

   

   

   

Perry Casson  

Regina, Canada

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum