 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
josok-e(at)ukolo.fi
Guest
|
 Posted: Mon Nov 20, 2006 12:04 pm Post subject: Was - Oil Cooler Thermostat ....now &quo |
 |
|
Hi All,
This one i got from Nev, who likes to install the regulator, the TCU, and the servo in a box on the P1 footwell, to be fed with cool air via a scat tube from the air-intake box or from the front of the radiators. And will be my setup. If i got it wrong i will be corrected i guesss
Regards,
Jos Okhuijsen
Visit - www.EuropaOwners.org
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
ptag.dev(at)tiscali.co.uk
Guest
|
| Posted: Mon Nov 20, 2006 10:29 pm Post subject: Was - Oil Cooler Thermostat ....now &quo |
|
|
Hi! Jos/all
I haven't the figures to hand but I know there is a big through put of luke
warm air from the used intercooler air and I believe it will be beneficial
to hose it across and down the back of the engine and where my P1 foot well
will have the TCU and Regulator fitted, which could also be boxed, with
expelled air jetted at the alternator and ignition system downwards. This
IMHO will all encourage the general downward flow of cooling air promoted
by high pressure in the cowl top. This was undoubtedly the successful way
I cooled the Jabiru Six. Nevilles thoughts below certainly reinforce my
experiences to date.
Regards
Bob Harrison G-PTAG
| Quote: | -- Original Message --
Subject: FW: Was - Oil Cooler Thermostat ....now &quo
From: "josok" <josok-e(at)ukolo.fi>
Date: Mon, 20 Nov 2006 22:02:44 +0200
To: europa-list(at)matronics.com
Reply-To: europa-list(at)matronics.com
Hi All,
This one i got from Nev, who likes to install the regulator, the TCU, and
the servo in a box on the P1 footwell, to be fed with cool air via a scat
tube from the air-intake box or from the front of the radiators. And will
be my setup. If i got it wrong i will be corrected i guesss
Regards,
Jos Okhuijsen
|
___________________________________________________________
Tiscali Unlimited Broadband with FREE weekend calls only 12.99!
http://www.tiscali.co.uk/products/broadband/
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
