davist(at)xsinet.co.za Guest
|
Posted: Thu Dec 07, 2006 12:00 am Post subject: Fuel Gauges |
|
|
I have a problem with Fuel gauges that under-read on my -6. They were working perfectly for 6 years then one day I noticed that first the right tank gauge and about two months later, the left started to under-read. With tanks full they barely indicate above 1/2 and when empty go well below the "0" On power down the one gauge whips back to below "0" and parks on the stop while the other one winds down more leisurely but also comes to rest well below the "0". They are the old type Ispro gauges with float sender units. They seem to indicate fuel decreasing as it is burnt off but it is almost as if the needles need to be "cranked" up
I have checked the earthing points and wiring but short of pulling the tanks off I am at a loss of what to do. Is there a resistance check one can do and if so how does one go about it? Has anyone had this problem? Any advice in welcome
Trevor D
[quote][b]
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|