 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
sportav8r(at)gmail.com
Guest
|
 Posted: Sat Dec 09, 2006 4:24 pm Post subject: New Topic! Wire label-making machines |
 |
|
They apparently sell some rather pricey heat shrink for it. 1/2, 3/8
and 1/4 inch flat widths. Is any of that going to grip a 22ga wire
very well?
I'm interested in this technology, but want to know more before I buy
any new toys.
-Bill B
On 12/9/06, sarg314 <sarg314(at)comcast.net> wrote:
| Quote: |
This outfit has the rhinopro 3000 for $65. Says it prints on heat shrink.
>http://www.provantage.com/dymo-15605~7DYMO02H.htm
>
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
Mark Phillips in TN
Joined: 10 Jan 2006
Posts: 431
Location: Columbia, TN
|
| Posted: Sat Dec 09, 2006 6:11 pm Post subject: New Topic! Wire label-making machines |
|
|
In a message dated 12/9/2006 6:26:35 PM Central Standard Time, sportav8r(at)gmail.com writes:
| Quote: | Is any of that going to grip a 22ga wire
very well? |
>>>
They claim the 1/4" stuff will go down to 1.18mm- I measured some 22awg tefzel at 1.25mm. Pretty close, but oughta work. Still not too tickled that it only seems to print the tube on one side. Leaning towards the Brady ID Pal that will print multiple rows that can be wrapped around the wire, plus if you screw up, you can remove the old sticker and put on a new one without removing the termination...
Mark
[quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
From The PossumWorks... |
|
| Back to top |
|
|
michele.delsol(at)microsi
Guest
|
| Posted: Tue Dec 12, 2006 8:05 am Post subject: New Topic! Wire label-making machines |
|
|
Affirmative - it does grip 22 with the smallest heat shrink tube they have.
I've done it.
Michele
RV8 - Finishing
--
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
