 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Don Owens
Joined: 17 Jan 2006
Posts: 24
Location: North Central Washington
|
 Posted: Fri Dec 08, 2006 12:54 pm Post subject: [Spam] RE: New Topic! Wire label-making machines |
 |
|
Michael, I am not familiar with these machines – how does it print on shrink tubing?
<![if !supportEmptyParas]> <![endif]>
Don Owens
<![if !supportEmptyParas]> <![endif]>
<![if !supportEmptyParas]> <![endif]>
<![if !supportEmptyParas]> <![endif]>
Mark,
I have the Dymo. Works good, lasts long time. J Prints on a shrink tube also.
Michael Sausen
-10 #352 Fuselage
In a message dated 12/07/2006 10:37:52 PM Central Standard Time, stein(at)steinair.com writes:
I'm really confused and boggled
Stein- what do you guys use to label your wires? I've used Brady lablemaker pro (dot matrix through ribbon) but machine is T-up and looking for replacement, preferably one that prints shrink tube. One RV-lister recommended the Dymo Rhino Pro 5000. Any other recommendations out there from actual users of one of these type machines?
And no, I'm not printing & cutting out itty bitty labels and slipping them into little pieces of clear shrink tube- I need a one-shot machine to get this done and move on...
Mark | Quote: | | <![if !supportEmptyParas]> <![endif]><![if !supportEmptyParas]> <![endif]> |
[quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
rvbuilder(at)sausen.net
Guest
|
| Posted: Fri Dec 08, 2006 6:51 pm Post subject: [Spam] RE: New Topic! Wire label-making machines |
|
|
The kit I bought is The Dymo RhinoPro 5000:
http://global.dymo.com/enUS/ProductAccessories/RhinoPRO_5000_Hard_Case_Kit.html
If you scroll down to accessories you’ll see that you can get label cartridges that are actually shrink wrap tubing. They also have a polyester label that is very durable. Look around and you can find the kit for about $150.
Michael
From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of springcanyon
Sent: Friday, December 08, 2006 2:53 PM
To: aeroelectric-list(at)matronics.com
Subject: RE: [Spam] RE: New Topic! Wire label-making machines
Michael, I am not familiar with these machines – how does it print on shrink tubing?
Don Owens
Mark,
I have the Dymo. Works good, lasts long time. J Prints on a shrink tube also.
Michael Sausen
-10 #352 Fuselage
In a message dated 12/07/2006 10:37:52 PM Central Standard Time, stein(at)steinair.com writes:
I'm really confused and boggled
Stein- what do you guys use to label your wires? I've used Brady lablemaker pro (dot matrix through ribbon) but machine is T-up and looking for replacement, preferably one that prints shrink tube. One RV-lister recommended the Dymo Rhino Pro 5000. Any other recommendations out there from actual users of one of these type machines?
And no, I'm not printing & cutting out itty bitty labels and slipping them into little pieces of clear shrink tube- I need a one-shot machine to get this done and move on...
Mark 012345678901234567
[quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
icubob(at)newnorth.net
Guest
|
| Posted: Sat Dec 09, 2006 3:50 pm Post subject: [Spam] RE: New Topic! Wire label-making machines |
|
|
michael,
i am interested in the dymo labeler #5000 you have. how would it work for labeling the panel? do the labels really stick? i also read something about being able to print on shrink tube. is this true?
thanks in advance, bob noffs
[quote] ---
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
