Matronics Email Lists :: View topic - Wire label-making machines

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wire label-making machines

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Speedy11(at)aol.com
Guest

Posted: Thu Dec 14, 2006 8:40 pm Post subject: Wire label-making machines

But, Michele, you're using the Rhino 5000.  The 3000, which Bill B. mentioned only uses 1/4" as the smallest heat shrink.  The 5000 can use smaller heat shrink.  Did you test the 1/4" shrink on the 22 GA wire?

 Stan Sutterfield

  

  	  Quote: 	
		  Subject: RE: New Topic! Wire label-making machines

Affirmative - it does grip 22 with the smallest heat shrink tube they have.

I've done it.



Michele

RV8 - Finishing



----------------------



They apparently sell some rather pricey heat shrink for it.  1/2, 3/8

and 1/4 inch flat widths.  Is any of that going to grip a 22ga wire

very well?



I'm interested in this technology, but want to know more before I buy

any new toys.



-Bill B



On 12/9/06, sarg314 <sarg314(at)comcast.net> wrote:

 	  Quote: 	
		  

 This outfit has the rhinopro 3000 for $65.  Says it prints on heat shrink.



 >http://www.provantage.com/dymo-15605~7DYMO02H.htm 	


 
	


  [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum