Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Battery wiring

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
indigoonlatigo(at)msn.com
Guest
PostPosted: Wed Jan 03, 2007 8:48 am    Post subject: Battery wiring Reply with quote
Can anyone that is near completion or has completed the plane tell me were
the battery cable goes once it is infront of the front seats. Does the cable
stay along the side and avoid interfering with the rudder pedals and goes up
into the upper consol or do they drop below into the space between the real
floor and the floor beneath the pedals/

Thanks

John G

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jwt(at)roadmapscoaching.c
Guest
PostPosted: Wed Jan 03, 2007 9:31 am    Post subject: Battery wiring Reply with quote
The battery cable goes along the left side of the plane up to and through
the firewall. Vans electrical installation instructions (comes with the
wiring kit) has the cable go through right at the very edge of the firewall
below the starter contactor.

John Testement
jwt(at)roadmapscoaching.com
40321
Richmond, VA
FWF, engine, wiring
do not archive


--

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
indigoonlatigo(at)msn.com
Guest
PostPosted: Wed Jan 03, 2007 10:18 am    Post subject: Battery wiring Reply with quote
So basically it just keeps running straight until it hits the firewall.
Does that mean that holes need to be drilled in the "J" type bulkhead
(vertically placed skin stiffner)that is right next to the rudder pedal. I
am not planning on cutting anything or drilling anything in this area
because I'm not needing to now, but trying to get a mental image of where
everthing is going. I've got fat cable on right and left sides of the fuse
for dual batteries.

I've had a difficult time finding pictures on builders web sites and seeing
what I am looking for.

John G.

Do Not Archive
[quote]From: "John Testement" <jwt(at)roadmapscoaching.com>
Reply-To: rv10-list(at)matronics.com
To: <rv10-list(at)matronics.com>
Subject: RE: Battery wiring
Date: Wed, 3 Jan 2007 12:30:44 -0500


<jwt(at)roadmapscoaching.com>

The battery cable goes along the left side of the plane up to and through
the firewall. Vans electrical installation instructions (comes with the
wiring kit) has the cable go through right at the very edge of the firewall
below the starter contactor.

John Testement
jwt(at)roadmapscoaching.com
40321
Richmond, VA
FWF, engine, wiring
do not archive
--

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rvreynolds(at)macs.net
Guest
PostPosted: Thu Jan 04, 2007 4:10 am    Post subject: Battery wiring Reply with quote
You can buy the wiring dwg without buying the kit. Its useful.

Richard Reynolds

On Jan 3, 2007, at 1:15 PM, John Gonzalez wrote:

[quote]
<indigoonlatigo(at)msn.com>

So basically it just keeps running straight until it hits the
firewall. Does that mean that holes need to be drilled in the "J"
type bulkhead (vertically placed skin stiffner)that is right next
to the rudder pedal. I am not planning on cutting anything or
drilling anything in this area because I'm not needing to now, but
trying to get a mental image of where everthing is going. I've got
fat cable on right and left sides of the fuse for dual batteries.

I've had a difficult time finding pictures on builders web sites
and seeing what I am looking for.

John G.

Do Not Archive

> From: "John Testement" <jwt(at)roadmapscoaching.com>
> Reply-To: rv10-list(at)matronics.com
> To: <rv10-list(at)matronics.com>
> Subject: RE: Battery wiring
> Date: Wed, 3 Jan 2007 12:30:44 -0500
>
>
> <jwt(at)roadmapscoaching.com>
>
> The battery cable goes along the left side of the plane up to and
> through
> the firewall. Vans electrical installation instructions (comes
> with the
> wiring kit) has the cable go through right at the very edge of the
> firewall
> below the starter contactor.
>
> John Testement
> jwt(at)roadmapscoaching.com
> 40321
> Richmond, VA
> FWF, engine, wiring
> do not archive
> --

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group